Sec1:24-Sec1:25

5.To exit stopwatch mode, press the MEMORY button to stop the stopwatch, then press the yellow MODE button to return to STEP mode.

 

MODE

0:14:02

button

MEMORY

15:01 3.5Mile/h

button

 

 

RESET

 

button

24STOPWATCH/TIMER Mode

Using the Countdown Timer

1.Repeatedly press the yellow S1 (MODE) button until the display is in STOPWATCH/TIMER mode. (Display will show hours:minutes:seconds.)

2.S1: Press and hold the yellow MODE button to enter SET mode.The HOUR display will start to blink.

3.S3: Press the S3 ▲ (MEMORY) button to increase the HOUR display. Press the S3 ▼ (RESET) button to decrease the HOUR display. Hold the button down to change hours quickly.

25

Sec1:26-Sec1:27

 

4.

S2: Press the yellow S2 (MODE) button to switch from

8. To reset CountdownTimer to 0 during countdown,

 

 

 

 

 

the HOUR display to the MINUTE display.The MINUTE

press the S3 ▲ (MEMORY) button to stop countdown,

 

 

 

display will start to blink.

then press and hold the yellow S1 (MODE) button to

 

 

5.

S3: Press the S3 ▲ (MEMORY) button to increase the

return to SET Mode. Go through the SET process again

 

 

 

MINUTE display. Press the S3 ▼ (RESET) button to

to return hours and minutes to 0. Finally, press and

 

 

 

decrease the MINUTE display. Hold the button down to

hold the yellow S4 (MODE) button to exit SET Mode.

 

 

 

change minutes quickly.

Press the yellow S1 (MODE) button once more to

 

 

6.

S4: Press and hold the yellow S4 (MODE) button for

return to STEP Mode.

 

 

 

 

 

 

2 seconds to exit SET mode.

 

 

 

7.

Press the S3 ▲ (MEMORY) button to begin countdown.

 

 

 

 

To stop or restart countdown at any time, press the

 

 

 

 

S3 ▲ (MEMORY) button again.

 

 

 

26

 

27

 

 

 

 

 

 

 

 

 

 

 

Page 7
Image 7
Accusplit AH190M28 operating instructions 01402, Sec124-Sec125, Sec126-Sec127, 1501 3.5 Mile/h, Using the Countdown Timer