33
2Type a password. The password may consist of up to eight
characters (A-Z, a-z, 0-9).
3Press Enter. Retype the password to verify your first entry and press
Enter.
4After setting the password, the computer automatically sets the
chosen password parameter to Present.
Removing a password
Should you want to remove a password, do the following:
1Use the cursor up/down keys to highlight a password parameter
and press the Enter key. The password box appears.
2Enter the current password and press Enter.
3Press Enter twice without entering anything in the new and
confirm password fields to remove the existing password.
Note: When you want to remove the Hard Disk (or 2nd Hard Disk)
password, you are prompted for the current Hard Disk password
before it is removed.
Changing a password
Should you want to change a password, do the following:
1Remove the current password.
2Set a new password.
Setting passwords
You can set passwords using:
•Notebook Manager
•BIOS Utility
TM230-280-e.book Page 33 Tuesday, December 17, 2002 4:15 PM