Acer 230 Series, 280 Series manual Device

	67
Error Messages	Corrective Action
02B2 Incorrect Drive A	Type of floppy drive A: not correctly identified in
type - run SETUP	Setup.
02B3 Incorrect Drive B	Type of floppy drive B: not correctly identified in
type - run SETUP	Setup.
02D0 System cache	RAM cache failed and BIOS disabled the cache.
error - Cache disabled	On older boards, check the cache jumpers. You
	may have to replace the cache. See your dealer. A
	disabled cache slows system performance
	considerably.
02F0: CPU ID:	CPU socket number for Multi-Processor error.
*02F4: EISA CMOS not	ServerBIOS2 test error: Cannot write to EISA
writeable	CMOS.
*02F5: DMA Test Failed	ServerBIOS2 test error: Cannot write to extended
	DMA (Direct Memory Access) registers.
*02F6: Software NMI	ServerBIOS2 test error: Cannot generate
Failed	software NMI (Non-Maskable Interrupt).
*02F7: Fail-Safe Timer	ServerBIOS2 test error: Fail-Safe Timer takes too
NMI Failed	long.
device Address Conflict	Address conflict for specified device.
Allocation Error for:	Run ISA or EISA Configuration Utility to resolve
device	resource conflict for the specified device.
*Failing Bits: nnnn	The hex number nnnn is a map of the bits at the
	RAM address which failed the memory test. Each
	1 (one) in the map indicates a failed bit. See
	errors 230, 231, or 232 above for offset address of
	the failure in System, Extended, or Shadow
	memory.
Invalid System	Problem with NVRAM (CMOS) data.
Configuration Data
I/O device IRQ conflict	I/O device IRQ conflict error.