Acer manual 310-e.book Page 92 Tuesday, October 27, 1998 517 PM

310-e.book Page 92 Tuesday, October 27, 1998 5:17 PM

Setup Utility

Parameter

Description

Display Always	When enabled the computer does not enter
On	display standby mode.
	Always enable this parameter when playing
	VCDs (Video Compact Disc). If not, the
	system will enter standby mode after 30
	minutes and the screen will go blank.
	Options: Enabled or Disabled
Battery Low	Enables or disables the suspend function
Suspend	during a battery-low condition. When the
	computer is running very low on battery
	power, the computer will enter suspend mode
	if PhDISK is installed and the suspend file is
	valid. See “PhDISK” on page 71.
	Options: Enabled or Disabled
Resume on	When on, and an incoming modem ring is
Modem Ring	detected, the computer wakes up from
	suspend mode.
	Options: On or Off
Resume on	When on and the system resume date and
Time	time are valid, the computer resumes (wakes
	up) at the set time and date.
	Options: On or Off
Resume Time	Sets the time the computer resumes from if
	Resume on Time is on.
	Format: HH:MM:SS (hour:minutes:seconds)
Resume Date	Sets the date the computer resumes from if
	Resume on Time is on.
	Format: DD/MM/YYYY (day/month/year)
Battery Low	Enables or disables warning beeps during a
Warning Beep	battery-low condition.
	Options: Enabled or Disabled

92 User’s Guide