Acer 420 manual Info, This menu provides you the information of the system, Parameter Description

Info.

This menu provides you the information of the system.

Parameter	Description
Floppy Drive	The Floppy Drive status is auto detected by the system. The information page would
	display “1.44MB, 3 1/2 if floppy drive exists; it would display “Not installed” if floppy drive
	does not exist.
IDE1 Model Name	Shows the Model name of HDD installed on Primary IDE master. The system will auto
	detect the hard disk model name. “None” means the hard disk drive is not existing or
	unknown type.
IDE1 Serial Number	This item displays the Model Name of HDD installed on Primary IDE master. If no hard
	disk or other devices are installed on Primary IDE master, this item will display a blank
	line.
IDE2 Model Name	Displays the Model Name of Device installed on Secondary IDE master. The hard disk or
	CD-ROM model is automatically detected by the system. If the hard disk drive or CD-ROM
	is not existing or unknown type, this field would display “None”.
IDE2 Serial Number	This field shows the Serial Number of HDD installed on Secondary IDE master. If no hard
	disk drive or other devices are installed on Primary IDE master, it will display a blank line.
System BIOS Version	Displays system BIOS version
VGA BIOS Version	Displays VGA BIOS version
Serial Number	Displays the serial number of the unit.

Chapter 2 41