Chapter 3 71
22. Unscrew the two screws holding the main board to the main frame.
23. Remove main board from the main frame.
24. Remove the two screws holding the MDC card.
25. Disconnect the MDC card connector and modem wire. Then remove the MDC card.
26. Use a tool to release the MDC cable lock.
27. Then remove the MDC cable.
28. Remove the three holding the support bracket.
29. Remove the support bracket.
.
30. Unscrew the three screws that secure the upper case shielding.
31. Then remove the upper case shielding.
32. Disconnect the FFC then remove it.
TM420.book Page 71 Monday, September 23, 2002 10:27 AM