Acer 5242, 5542G, 5738DZG, 5738G manual Parameter Description Format/Option

The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.

Parameter	Description	Format/Option
System Time	Sets the system time. The hours are displayed	Format: HH:MM:SS
	with 24-hour format.	(hour:minute:second) System Time
System Date	Sets the system date.	Format MM/DD/YYYY (month/day/
		year)
		System Date
System Memory	This field reports the memory size of the system.
	Memory size is fixed to 640MB
Total Memory	This field reports the total memory size of the
	system.
Extended Memory	This field reports the memory size of the
	extended memory in the system.
	Extended Memory size=Total memory size-1MB
VGA Memory	Shows the VGA memory size.
Quiet Boot	Determines if Customer Logo will be displayed or	Option: Enabled or Disabled
	not; shows Summary Screen is disabled or
	enabled.
	Enabled: Customer Logo is displayed, and
	Summary Screen is disabled.
	Disabled: Customer Logo is not displayed, and
	Summary Screen is enabled.
Network Boot	Enables, disables the system boot from LAN	Option: Enabled or Disabled
	(remote server).
F12 Boot Menu	Enables, disables Boot Menu during POST.	Option: Disabled or Enabled
D2D Recovery	Enables, disables D2D Recovery function. The	Option: Enabled or Disabled
	function allows the user to create a hidden
	partition on hard disc drive to store operation
	system and restore the system to factory
	defaults.
SATA Mode	Control the mode in which the SATA controller	Option: AHCI or IDE
	should operate.

NOTE: The sub-items under each device will not be shown if the device control is set to disable or auto. This is because the user is not allowed to control the settings in these cases.

32 Chapter 2