10.Press the latch to pop up the WLAN card and detach the WLAN card from the WLAN socket.
NOTE: When attaching the antenna back to the WLAN board, make sure the cable are arranged properly.
Removing the Optical Drive Module
1.See “Removing the Battery Pack” on page 44.
2.See “Removing the SD Dummy Card” on page 45.
3.See “Removing the DIMM Module” on page 46.
4.See “Removing the Back Cover” on page 47.
5.See “Removing the Hard Disk Drive Module” on page 48.
6.See “Removing the WLAN Modules” on page 51.
Chapter 3 | 53 |
