Removing the Touchpad FFC

IMPORTANT: The touchpad board cannot be removed individually. To replace the touchpad board, replace the entire upper cover.

1.See “Removing the Upper Cover” on page 64.

2.Remove the adhesive tape securing the touchpad FFC to the touchpad board.

3.Lift the FFC to detach the adhesive securing the cable to the upper cover.

4.Release the FFC locking latch and disconnect the touchpad FFC from the connector.

70

Chapter 3

Page 80
Image 80
Acer 5252, 5552G manual Removing the Touchpad FFC