Removing the CPU

IMPORTANT: The pins on the underside of the CPU are very delicate. If they are damaged, the CPU may malfunction. Place the CPU on a clean, dry surface when it is not installed.

1.See “Removing the Thermal Module” on page 82.

2.Using a flat-bladed screw driver, rotate the CPU locking screw 180° counter-clockwise as shown.

3.Lift the CPU clear of the socket as shown.

NOTE: Circuit boards >10 cm² have been highlighted with a yellow rectangle as shown in the previous

image. Please detach the Circuit board and follow local regulations for disposal.

84

Chapter 3

Page 94
Image 94
Acer 5552G, 5252 manual Removing the CPU