![](/images/new-backgrounds/1156528/15652889x1.webp)
4.In flash BIOS, the message Please do not remove AC Power Source displays.
Plug in the AC power to continue.
5.Flash is complete when the message Flash programming complete displays.
WinFlash Utility
Perform the following steps to use the WinFlash Utility:
1.
2.Click OK to begin the update. WinFlash closes all applications and shuts down the system. NOTE: Place only one *.wph file with flash32.exe in the same folder when executing this procedure.
Chapter 2 | 35 |