6.Lift up carefully to remove the CPU.
NOTE: When installing the CPU, make sure to install the CPU with PIN 1 at the corner as shown.
Removing the LCD Module
1.See “Removing the Battery Pack” on page 50.
2.See “Removing the SD dummy card” on page 51.
3.See “Removing the ExpressCard dummy card” on page 51.
4.See “Removing the Lower Cover” on page 52.
5.See “Removing the WLAN Board Modules” on page 54.
6.See “Removing the Middle Cover” on page 62.
7.See “Removing the Heatsink Fan Module” on page 64.
8.See “Removing the CPU Heatsink Module” on page 65.
Chapter 3 | 67 |
