20.Carefully pry loose and remove the touch pad board.
WARNING:The touchpad board is glued to the upper case, only remove the touchpad board if it is defective.
Removing the Modem Board
1.See “Removing the Battery Pack” on page 50.
2.See “Removing the SD dummy card” on page 51.
3.See “Removing the ExpressCard dummy card” on page 51.
4.See “Removing the Lower Cover” on page 52.
5.See “Removing the DIMM” on page 53.
6.See “Removing the WLAN Board Modules” on page 54.
7.See “Removing the Hard Disk Drive Module” on page 56.
8.See “Removing the Optical Drive Module” on page 58.
9.See “Removing the Middle Cover” on page 62.
10.See “Removing the Keyboard” on page 63.
11.See “Removing the Heatsink Fan Module” on page 64.
12.See “Removing the CPU Heatsink Module” on page 65.
80 | Chapter 3 |
