Acer 5742G, 5742ZG manual DOS Flash Utility, Stdvdram GT32N

DOS Flash Utility

Perform the following steps to use the DOS Flash Utility:

1.Press F2 during boot to enter the Setup Menu.

2.Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move USB HDD to position 1.

					InsydeH20 Setup Utility		Rev. 3.5
Information Main				Security	Boot	Exit
	Boot priority order:						Item Specific Help
Use < > or < > to select
	1		. IDE0: WDC WD 3200BEVT-22A23TO
2		. USB FDD :					a device, then press
3		. Network Boot: LEGACY PCI DEVICE					<F5> to move it down the
4		. USB HDD :					list, or <F6> to move
	5	. USB CDROM	:				it up the list. Press
	6	. IDE1 : HL-DT	-STDVDRAM GT32N				<Esc> to escape the menu

F1 Help	Select	Item	F5/F6	Change	Values	F9	Setup	Default
ESC Exit	Select	Menu	Enter	Select	SubMenu	F10	Save	and Exit

3.Execute the BIOS.BAT batch file to update BIOS. The flash process begins as shown.

40 Chapter 2