AcerRouter 700 Series User Guide 3-23
For all other switch types, no additional SPID information is required.
If your switch type is Permanent 64K or Permanent 128K, no additional
information is required.
Step 5 Select APPLY to add the connection profile to the AcerRouter 700s
database, or select ADVANCED for more options and proceed to the next
section.
The following ISDN Port Configuration options appear when you click the Advance
d button on the previous screen.
This selection tells the AcerRouter 700 if it requires to validate an incoming data call
by examining the ISDN sub-address associated with that call.
Step 6 Set the following parameters:
Ignore Sub-Address, if any: For an incoming data call if you want to ign
ore the called party sub-address.
Require Sub-Address for Data Calls: If you require and incoming data
call to contain the called party sub-address, party or extension number to
accept an incoming call.
Sub-Address: Enter the sub-address for the call to be accepted.
Step 7 Click OK.
Note: For the sub-address to operate correctly, all entries for any type of conn
ection profile (Single dial-in user and office-to-office) must all be configured for
sub-address operation.
Configuring a Dial-in User Profile
Step 1 Select Connection Profiles from the menu:
Configuration - Connection Profiles
Information about each dial-in user who is allowed access is stored in a
“connection profile.” When you select Connection Profiles, the Conne
ction Profile Summary screen appears only if you have existing Conne
Incoming Sub-Address
Require Sub-Address for Data Calls
Port Configuration
ISDN
CANCEL OK
Options Ignore Sub-Address, if any
Sub Address