3-22 AcerRouter 700 Series User Guide
Setting Up Dial-in User Accounts
If you selected Dial-in Access for Off-Site Users from the SMART Customization
screen, follow the steps in this section to set up the AcerRouter 700 to allow dial-in
access from remote users.

ISDN Configuration

Step 1 Select Dial-in Access for Off-Site Users in the SMART Customization
screen. If you want to share NetWare resources on this connection, select
Share NetWare(IPX) Resource also.Click NEXT.
Note: The SMART Customization screen displays the very first time you run the S
MART software. To display this screen again, select Customize User Interface from
the menu.
Step 2 If you have already configured your ISDN interface, skip to Step 6. Othe
rwise, configure your ISDN interface now. Select ISDN from the menu:
Configuration - WAN Interfaces - ISDN
The Port Configuration screen displays.
Step 3 Select your ISDN Switch Type from the pull-down list. Your ISDN se
rvice provider will tell you what switch type you have.
Step 4 After you select your ISDN Switch Type, you may be required to enter
Directory Phone Number 1” and “Directory Phone Number 2”, or “S
PID1and “SPID2.”
If your switch type is Auto-detect (available in North America only), ente
r your Directory Phone Number 1 and Directory Phone Number 2.
If your switch type is NT DMS-100, ATT 5ESS (Multipoint), N1-1, ente
r SPID1 and SPID2 (provided by your phone company).
S
imple
M
ultifunction
A
ccess configu
R
ation
T
ool
Basic Internet Access
Internet Access with Advanced Configuration
Access to/from Remote Site (e.g., Branch Office)
Dial-in Access for Off-Site Users
Share NetWare(IPX) Resource
Select one or more items to be configured during this management session
Next
ISDN Switch Type
Directory Phone Number 1
Directory Phone Number 2
Port Configuration
APPLY
ISDN
Auto-detect (North America only)
ADVANCED