Product Description

Controller Features

Features of the AcceleRAID 170 controller include:

•One QLogic ISP 10160A chip to support one Ultra 160 SCSI LVD channel

•Intel i960RM RISC processor operating at 100MHz

•32MB, 64MB, and 128MB ECC cache DIMM module

•PCI 2.2 compliant

•1MB, 8-bit flash EEPROM for BIOS and code

•Built-in configuration utilities (in BIOS)

•Write-through and write-back cache support

•PCI Hotplug capability allows the AcceleRAID 170 to be swapped with a replacement without powering down the system

￿Caution

Be sure the motherboard you are using supports PCI Hotplug before attempting to use this feature, or serious damage to the controller and/or the motherboard could result. (The motherboard must be PCI 2.2 compliant if using PCI Hot Plug.)

Channel Capabilities

15 Ultra 160 SCSI devices per channel

Controller Capabilities

•15 physical drives in the drive group (array)

•32 total logical drives on the controller

•Supports RAID levels 0, 1, 0+1, 3, 5, 10, 30, 50, and JBOD

1-2

AcceleRAID 170 Installation Guide