Limitations on Mixing SCSI Drives

Limitations on Mixing SCSI DrivesNarrow with Wide SCSI Drives

If you mix narrow and wide SCSI devices on the controller, use a terminator that does not terminate the upper eight bits, and be sure to properly terminate the end of the bus with either a 16-bit terminator or a 16-bit device that has termination enabled.

LVD with Single-ended Drives

If LVD capable drives are installed on a channel with single-ended devices, all drives on the channel will operate as if they were single-ended devices. This will also limit the bus length to the single-ended bus length specified in Table 2-3.

2-16

AcceleRAID 170 Installation Guide