Chapter 3

Controller Start-up

This chapter describes:

•BIOS Options•BIOS Configuration Utility (RAID EzAssist)•Operating System, Device Drivers, GAM•What to Check in Case of Problems

This chapter describes the AcceleRAID 170 RAID controller start-up procedures and messages produced by the BIOS during start-up or re-boot. This chapter also explains three BIOS options that are available for configuring controller operation.

BIOS Options

After physically installing the controller and connecting the cabling, do the following steps if you need to set or modify a BIOS option, see “Setting BIOS Options” on page 3-2for details:

1.Power on the computer.

2.Watch the messages on the screen for the following prompt to be displayed:

Press <ALT-M> for BIOS options

3.Press Alt–Mto get into the BIOS Options menu.

4.The BIOS Options menu provides the following items to choose from:

5.To select any of the items in the menu, highlight the selection with the Up Arrow or Down Arrow. Press Enter to toggle any of the three items.

☛Note

BIOS must be enabled to toggle the CD-ROM boot option.

Manual No. 775064

3-1