Acer Altos G710 Installing an ePanel module (optional)

3 System upgrade
76
Installing an ePanel module (optional)
An optional ePanel module is available for the Altos G710 server
system.
Note: ePanel is not included with your system. To purchase an
ePanel module, contact your local Acer representative or order
directly from http://www.acer.com/.
To install an ePanel module to your server:
1 Open the bezel door. Refer to “Opening the bezel door” on page
41 for instructions.
2 Remove the LCD display cover from the bezel door by following
the steps below:
(1) Remove the two screws that secure the rear and front LCD
display cover to the bezel door (1). Set the screws aside.
(2) Remove the rear (2) and front cover (3). Set the covers aside.
3 Remove the bezel door. Refer to “Removing the bezel door” on
page 41 for instructions.