TECHNICAL SUPPORT (FAQ)
Problem & Question |
| Possible Solution | |||
Power LED is not on |
| *Check if the Power Switch is in the ON | |||
|
|
|
|
| position |
|
|
|
|
| *Power Cord should be connected |
No Plug & Play |
|
| *Check if the PC system is Plug & Play | ||
|
|
|
|
| compatible莤 |
|
|
|
|
| *Check if the Video Card is Plug & Play |
|
|
|
|
| compatible |
|
|
|
|
| *Check if the |
|
|
|
|
| Cable is bent |
Picture is fuzzy |
|
| *Adjust the Contrast and Brightness | ||
|
|
|
|
| Controls. |
Picture | bounces | or a | wave | *Move electrical devices that may cause | |
pattern is present in the picture | electrical interference. | ||||
The power LED is ON (orange) | *Computer Power Switch should be in | ||||
but there’s | no | video | or no | the ON position. | |
picture. |
|
|
|
| *Computer Video Card should be snugly |
|
|
|
|
| seated in its slot |
|
|
|
|
| *Make sure monitor’s video cable is |
|
|
|
|
| properly connected to the computer. |
|
|
|
|
| *Inspect monitor’s video cable and make |
|
|
|
|
| sure none of the pins are bent. |
|
|
|
|
| *Make sure computer is operational by |
|
|
|
|
| hitting the CAPS LOCK key on the |
|
|
|
|
| keyboard while observing the CAPS |
|
|
|
|
| LOCK LED. The LED should either |
|
|
|
|
| turn ON or OFF after hitting the CAPS |
|
|
|
|
| LOCK key. |
Missing | one | of | the primary | *Inspect the monitor’s video cable and | |
colors | (RED, | GREEN, | or | make sure that none of the pins are | |
BLUE) |
|
|
|
| bent. |
13
