FRONT PANEL CONTROL
•
/Power Button:
Press this button to turn the monitor ON or OFF, And display the monitor’s state.
•Power Indicator:
Green | — | Power On mode. |
Orange | — | Stand by mode. |
•MENU / ENTER :
Activate OSD menu when OSD is OFF or
•<:
navigate through adjustment icons when OSD is ON or adjust a function when function is activated.
•>:
navigate through adjustment icons when OSD is ON or adjust a function when function is activated.
•Auto Adjust button / Exit:
1.When OSD menu is in active status, this button will act as
2.When OSD menu is in off status, press this button for 2 seconds to activate the Auto Adjustment function.
The Auto Adjustment function is used to set the HPos, VPos, Clock and Focus.
NOTES
•Do not install the monitor in a location near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, or excessive dust or mechanical vibration or shock.
•Save the original shipping carton and packing materials, as they will come in handy if you ever have to ship your monitor.
•For maximum protection, repackage your monitor as it was originally packed at the factory.
•To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety precaution, always unplug the monitor before cleaning it.
8
