OnChip IDE Device
Scroll to this item and press ENTER to enter the
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple sector read/write. If your IDE hard drive supports block mode, select Enabled for automatic detection of the optimal number of block read/write per sector the drive can support.
IDE DMA Transfer Access
This item allows you to enable the transfer access of the IDE DMA.
On-Chip Primary/Secondary PCI IDE
The integrated peripheral controller contains an IDE interface with support for two IDE channels. Select Enabled to activate each channel separately.
IDE Primary/Secondary Master/Slave PIO
Each IDE channel supports a master device and a slave device. These four items let you assign which kind of PIO (Programmed Input/Output) is used by IDE devices. Choose Auto to let the system auto detect which PIO mode is optimal, or select a PIO mode from zero to four.
IDE Primary/Secondary Master/Slave UltraDMA
This main board supports UltraDMA technology, which provides faster access to IDE devices. If you install a device that supports UltraDMA, you can change the item on this list to Auto. You
Chapter 2 | 36 |
