Gate A20 Option

This item defines how the system handles legacy software that was written for an earlier generation of processors. Set this item for the default value.

Security Option

If you have installed password protection, this item defines if the password is required at system start up, or if it is only required when a user tries to enter the Setup Utility.

APIC Mode

This item allows you to enable or disable the APIC (Advanced Programmable Interrupt Controller) mode. APIC provides symmetric multi-processing (SMP) for systems.

MPS Version Control For OS

This item specifies which version of MPS (Multi-Processor Specification) this main board will use. Set this item for its default setting.

Silent Boot

This item enables or disables the Silent Boot function.

Configuration Table

This item enables or disables the Configuration Table in BIOS setting.

33

Chapter 2

Page 41
Image 41
Acer E700 manual Gate A20 Option, Security Option, Apic Mode, MPS Version Control For OS, Silent Boot, Configuration Table