28 On-Screen Status Displays
An
ON SCREEN ON:
•Whenever you press the PLAY button or the STOP button, some of the contents of the status display will appear for five seconds.
COUNTER ONLY:
•The tape counter will appear
counter will remain on the screen.
ON SCREEN OFF:
•No status display will appear when you press function buttons
or the EXIT/STATUS button.
To select one of the status display modes, follow these steps.
1
Press the VCR button, then press the MENU button.
2
Press the Number 2 button to select VCR SET UP.
TO SELECT PUSH NO. SHOWN
1SET REPEAT PLAY (OFF)
2ON SCREEN MODE
3LANGUAGE
4SET VCR PLUS+ CH
5SET CABLE BOX
6SET DSS RECEIVER
7AUDIO OUT
8VIDEO STABILIZER (OFF) TO END PUSH EXIT
3
Press the Number 2 button to select ON SCREEN MODE.
TO SELECT PUSH NO. SHOWN
1 ON SCREEN ON (ON)
2COUNTER ONLY
3ON SCREEN OFF
TO END PUSH EXIT
4
Press the Number 1 button to select ON SCREEN ON, the Number 2 button to select COUNTER ONLY, or the Number 3 button to select ON SCREEN OFF. (ON) will appear beside the selected status display mode.
5
Press the EXIT/STATUS button to exit.
Channel
Function Button
Pressed Time
STOP | 12:00 AM | |
| CH 10 |
|
|
| |
SLP M 1:23:45 HIFI
|
|
|
|
|
Tape |
|
|
| |
Speed |
| Sound Program | ||
|
|
|
|
|
|
| Tape Counter and | ||
|
| Counter Memory | ||
Helpful Hints
•In On Screen On and Counter Only modes:
•You may bring up the status dis- play at any time by pressing the EXIT/STATUS button. (The excep- tion is during Slow, Search, or Still mode.) The display will appear for about five seconds.
•Channel numbers (when tuned) will appear for a few seconds.
•When tape playback is stopped, press the EXIT/STATUS button to see the time, counter information, or channel number on the display panel. During tape playback, press the EXIT/STATUS button to see the time or counter information on the display panel. The channel will not appear.
