Setting the Controller to Operate a DSS Receiver 45
•If you use a DSS Receiver, you must set the clock manually. Details are on page 14.
•Complete the steps on page 27 before proceeding. This will allow you to use the VCR remote control to operate the DSS Receiver, and you will learn your DSS Receiver code.
1 Turn on the DSS Receiver. Select a channel other than 205.
1
Turn on the DSS Receiver; select a channel other than 205 at the DSS Receiver.
2
Press the VCR button, then press the MENU button.
TO SELECT PUSH NO. SHOWN
1PROGRAM
2VCR SET UP
3TUNER SET UP
4INPUT SELECT
5SET CLOCK
6SET REMOTE LOCATOR
TO END PUSH EXIT
3
Press the Number 2 button to select VCR SET UP.
TO SELECT PUSH NO. SHOWN
1 SET REPEAT PLAY (OFF)
2ON SCREEN MODE
3LANGUAGE
4SET VCR PLUS+ CH
5SET CABLE BOX
6SET DSS RECEIVER
7AUDIO OUT
8 VIDEO STABILIZER (OFF) TO END PUSH EXIT
4
Press the Number 6 button to select SET DSS RECEIVER.
DSS RECEIVER CONTROLLER
OFF
TO SELECT PRESS NUMBER
1ON
2OFF
TO CONTINUE PUSH MENU
TO END PUSH EXIT
5
Press the Number 1 button to set the DSS RECEIVER
CONTROLLER to ON.
DSS RECEIVER CONTROLLER
ON
TO SELECT PRESS NUMBER
1ON
2OFF
TO CONTINUE PUSH MENU
TO END PUSH EXIT
Instructions continue on page 46.
CBL/DSS | VCR | TV | 2 |
PAUSE/STILL | POWER | MUTE |
|
REW | PLAY | FF |
|
|
| ||
EJECT | STOP | F.ADV |
|
|
|
| |
VCR PLUS+/ENTER |
| ||
EXIT/STATUS |
| CLEAR |
|
| MENU |
|
|
JOG/SHUTTLE |
|
| |
VOL |
| CHANNEL |
|
|
|
| |
5 | 1 | 2 | 3 | 3 |
| 4 | 5 | 6 | 4 |
| 7 | 8 | 9 | |
| 100 | 0 |
|
REC /OTR | INDEX | MEMO |
| VAR. |
|
| SLOW |
|
SPEED | VCR/TV SLOW | TRACKING SKIP |
SEARCH
REMOTE LOCATOR
Helpful Hints
•The Controller can change channels at the DSS Receiver only during a timer recording.
•If the VCR’s remote control does not operate your DSS Receiver, the Controller will not change channels at the DSS Receiver during a timer recording. In this case, you must select the channel to be recorded at the DSS Receiver before a timer recording begins. Leave the DSS Receiver on for the timer recording. Enter the DSS Receiver output chan- nel (03 or 04) at step 5 on page 35. Details are on page eight.
