Philips VRX463 warranty One Touch Recording, Starting an OTR, Stopping an OTR

32 One Touch Recording

The one touch recording (OTR) function allows you to start an immediate timed recording 30 minutes to nine hours long of the channel you are watching. Before you begin, make sure:

•Channels are programmed. Details are on page 12.

•The desired recording speed (SP or SLP) has been selected with the (Tape) SPEED button. Details are on pages 36 and 58.

•There is a tape in the VCR. Make sure the tape’s record tab is intact (see page five) and the tape is long enough to record the program(s). If the end of the tape is reached during an OTR, recording will stop. The VCR will eject the tape and turn itself off.

•The VCR is in VCR position. (The VCR light will appear on the display panel of the VCR when the VCR is in VCR position. If the VCR light does not appear, press the VCR/TV button once.)

CBL/DSS	VCR	TV	1
PAUSE/STILL	POWER	MUTE
REW	PLAY	FF

EJECTF.ADV

STOP

VCR PLUS+/ENTER

EXIT/STATUSCLEAR

MENU

Starting an OTR

VOL

1

JOG/SHUTTLE

CHANNEL

2

Press the VCR button.

2

Use the CHANNEL Up/Down buttons or the Number buttons to select the channel you want to record.

3

1 2 3

4 5 6

7 8 9

Press the REC(ord)/OTR button 2 - 19 times, until the

desired recording length (30 minutes to nine hours) appears in the	100	0	GO-TO
	REC /OTR	INDEX	MEMO
upper left corner of the screen and on the display panel briefly.
		VAR.
The OTR light will flash on the display panel; the REC(ord) light		SLOW
	3 SPEED VCR/TV SLOW		TRACKING SKIP
will appear on the display panel.			SEARCH

OTR (0:30)

REMOTE LOCATOR

CH 12

SLP

Stopping an OTR

To stop an OTR before recording is finished, press the STOP but- ton.

To cancel the OTR but continue recording, press the REC(ord)/OTR button until REC appears in the upper left corner of the TV screen. The REC(ord) light will remain on the display panel, but the OTR light will disappear.

Helpful Hints

•To check the time remaining for an OTR after the OTR is in progress, press the EXIT/STATUS button.

•To change the recording length while an OTR is in progress, press the REC(ord)/OTR button until the desired length appears on-screen.

•If the preset time for a timer recording comes up during an OTR, the OTR has priority.

•You may not be able to access the menu during an OTR.