Philips VRX463 warranty Timer Recording, Press the Number 1 button to select Program

34 Timer Recording

Follow the steps below to program your VCR to record TV pro- grams while you’re away from home. You can program up to eight timer recordings. For each one, the VCR will turn itself on, record, and turn itself off automatically.

Before you begin make sure:

•Channels are programmed. Details are on page 12.

•The clock is set. Details are on pages 14 - 17.

•There is a tape in the VCR. Make sure the tape’s record tab is intact and the tape is long enough to record the program(s).

•The VCR is in VCR position. The VCR light will appear on the display panel of the VCR when the VCR is in VCR position. If the VCR light does not appear, press the VCR/TV button once.

•When you use a Cable Box or DSS Receiver, timer recordings are programmed differently. Please read the information on page eight before proceeding.

Complete each step within 60 seconds of completing the previous step. If you don’t, you may start again at step 1.

CBL/DSS	VCR	TV	1
PAUSE/STILL	POWER	MUTE
REW	PLAY	FF
EJECT	STOP	F.ADV
VCR PLUS+/ENTER
EXIT/STATUS		CLEAR
	MENU
JOG/SHUTTLE
VOL		CHANNEL

1

Press the VCR button, then press the MENU button.

TO SELECT PUSH NO. SHOWN

1PROGRAM

2VCR SET UP

3TUNER SET UP

4INPUT SELECT

5SET CLOCK

6SET REMOTE LOCATOR

TO END PUSH EXIT

2

Press the Number 1 button to select PROGRAM.

TO SELECT PUSH NO. SHOWN

1ONCE

2DAILY

3WEEKLY

4PROGRAM REVIEW

TO END PUSH EXIT

3

Select a once, daily, or weekly recording.

•Press the Number 1 button to select ONCE. The VCR will record a TV program on any day you choose, up to 12 months away.

•Press the Number 2 button to select DAILY. The VCR will record a program every day from Monday through Friday, start- ing at the same time and recording for the same length of time.

•Press the Number 3 button to select WEEKLY. The VCR will record on the same day, at the same time, and for the same length of time every week.

DAILY PROGRAM (MON-FRI)	Daily
PROGRAM - 12345678 -
	Recording
	Menu
SELECT PROGRAM NUMBER	Screen
TO END PUSH EXIT

2	1	2	3	3
	4	5	6
	7	8	9
	100	0	GO-TO

REC /OTR	INDEX	MEMO
	VAR.
	SLOW
SPEED	VCR/TV SLOW	TRACKING SKIP

SEARCH

REMOTE LOCATOR

Helpful Hints

•To make corrections while you are programming a timer recording, press the CLEAR button until the cur- sor is flashing on the item you want to change. Enter the correct informa- tion.

•Leave the Cable Box or DSS Receiver on for a timer recording (if applica- ble). See page eight for details.

•Entries that do not match the VCR’s internal calendar will cause a ques- tion mark to appear on-screen (for example, if you enter a Saturday date for a DAILY recording). Enter the correct information.