Philips VRX463 warranty Instructions continue on, Box/DSS Receiver on

Timer Recording (cont’d) 35

4

Use the Number buttons (1 - 8) to select a slot in which to store the timer recording. Flashing numbers indicate an open slot (one in which a timer recording has not yet been stored).

NOTE: If you select a number that has already been used to store a timer recording, PREVIOUSLY SET PROGRAM will appear on-screen briefly. Then information about the program in that slot will appear. If this happens, press the EXIT/STATUS button. Start again at step 1.

ONE TIME PROGRAM

PROGRAM 1

CHANNEL – –

TO CORRECT PUSH CLEAR

TO END PUSH EXIT

5

Use the Number buttons to enter the channel you want to record.

•If you are using a standard antenna or cable to VCR to TV hookup (as shown on pages six - seven), enter the channel of the TV program you want to record.

•If you are recording from line input, press 0, 0. A/V REAR will appear on-screen.

•If you are using a Cable Box/DSS Receiver, enter the output channel of your Cable Box/DSS Receiver (03 or 04). Leave the Cable Box/DSS Receiver on. Details are on pages eight and 58.

•If you are using the Controller, enter the Cable Box/DSS Receiver channel that you want to record. Leave the Cable

Box/DSS Receiver on.

ONE TIME PROGRAM

PROGRAM	1
CHANNEL	10 CABLE/TV
TIME ON	– – : – – – –

TO CORRECT PUSH CLEAR

TO END PUSH EXIT

6

Press two Number buttons for the hour you want the recording to begin. Press two Number buttons for the minute(s) you want the recording to begin. Press 1 for AM or 2 for PM. For example, for 9:30 PM, press 09, 30, 2.

ONE TIME PROGRAM

PROGRAM	1
CHANNEL	10 CABLE/TV
TIME ON	09:30 PM
TIME OFF	– – : – – – –

TO CORRECT PUSH CLEAR

TO END PUSH EXIT

7

Follow step 6 to set the recording’s stop time.

Instructions continue on page 36.

4-7

CBL/DSS	VCR	TV
PAUSE/STILL	POWER	MUTE

PLAY

REWFF

EJECTF.ADV

STOP

VCR PLUS+/ENTER

EXIT/STATUSCLEAR

	MENU
VOL	JOG/SHUTTLE
	CHANNEL

1 2 3

4 5 6

7 8 9

100 0 GO-TO

REC /OTR INDEX MEMO

VAR.

SLOW

SPEED VCR/TV SLOW TRACKING SKIP

SEARCH

REMOTE LOCATOR

Helpful Hints

•If the preset time for a timer record- ing comes up during a One Touch Recording, the OTR has priority.

•If you leave the VCR on past the scheduled start time of a timer recording, you will not be prompted by the VCR again to turn off the VCR. When you turn off the VCR, the timer recording will not take place.

•If the end of the tape is reached dur- ing a Timer Recording, recording will stop. The VCR will eject the tape,

then turn itself off.