Philips VRX463 warranty Manual PBS Channel Selection

16 Setting the Clock (cont’d)

Manual PBS Channel Selection

1

Press the VCR button, then press the MENU button.

2

Press the Number 5 button to select SET CLOCK. CABLE BOX USERS SET CLOCK MANUALLY will appear on-screen briefly. Then, the menu shown below will appear. (If AUTO CLOCK is set to OFF, SET TIME ZONE will not be available.)

	SET CLOCK
1	AUTO CLOCK	(ON)
2	DAYLIGHT SAV TIME	(ON)

3SET MANUAL CLOCK (OFF)

4SET TIME ZONE

(AUTO)

TO SELECT PUSH NO. SHOWN

TO END PUSH EXIT

3

If (ON) appears to the right of AUTO CLOCK, press the Number 1 button twice. If (OFF) appears to the right of AUTO CLOCK, press the Number 1 button once.

AUTO CLOCK

AUTO CLOCK USES

PBS CHANNEL DATA

1SET PBS CH. AUTO

2SET PBS CH. MANUAL

TO SELECT PUSH NO. SHOWN

TO END PUSH EXIT

4

Press the Number 2 button to select SET PBS CH. MAN- UAL to tell the VCR the PBS channel from which to take the time.

5

Use the Number buttons to enter your PBS channel num- ber. (If you make a mistake, press the CLEAR button.) Finally, press the EXIT/STATUS button.

6

The Time Zone Selection menu will appear. Press one Number button to enter the single-digit code for your Time Zone.

7

Press the EXIT/STATUS button. You will be prompted to turn off the VCR.

Press the EXIT/STATUS button again, then press the POWER button to turn off the VCR. Auto will flash in the display panel until the clock is set. Leave the VCR power off until the clock is set.

7	CBL/DSS	VCR	TV	1
	PAUSE/STILL	POWER	MUTE
		PLAY
	REW		FF
5	EJECT	STOP	F.ADV
	VCR PLUS+/ENTER
	EXIT/STATUS		CLEAR
		MENU
	JOG/SHUTTLE
	VOL		CHANNEL

3	1	2	3	4
	4	5	6	2
	7	8	9
	100	0	GO-TO

6	REC /OTR	INDEX	MEMO
		VAR.
		SLOW
	SPEED	VCR/TV SLOW	TRACKING SKIP

SEARCH

REMOTE LOCATOR

Helpful Hints

•The time will be updated at the top of each hour (except at 11 p.m., midnight, 1 a.m. and 2 a.m.).

•To see the time on the display panel, press the EXIT/STATUS but- ton repeatedly.

•If - - : - - appears on the display panel after you turn off the VCR, the VCR could not find the time.

Repeat steps 1 - 7 above, entering a different PBS channel at step 5. Or, set the clock following the steps on page 17.