Philips VRX463 warranty Programming Channels, Press the VCR button, then press the Menu button to

12 Automatic Channel Programming

Programming Channels

Although your VCR may automatically memorize the channels you receive when you turn it on for the first time, this function lets you reprogram channels. Make each entry within one minute of the previous entry.

1

Press the VCR button, then press the MENU button to

bring up the main menu display.

TO SELECT PUSH NO. SHOWN

1PROGRAM

2VCR SET UP

3TUNER SET UP

4INPUT SELECT

5SET CLOCK

6SET REMOTE LOCATOR

TO END PUSH EXIT

2

Press the Number 3 button to select TUNER SET UP.

TO SELECT PUSH NO. SHOWN

1	TV
2	CABLE TV	(ON)

3AUTO PROGRAMMING

4ADD/DELETE CH

5CH MEMORY REVIEW

6 TV STEREO (ON)

7SECOND AUDIO TO END PUSH EXIT

3

Press the Number 1 button to select TV (if you have an antenna) or the Number 2 button to select CABLE TV (if you have a cable connection). (ON) will appear to the right of your selection.

4

Press the Number 3 button to select AUTO PROGRAM- MING. AUTO SET PROCEEDING/PLEASE WAIT and a scale that shows the progress of programming will appear on-screen. The VCR will place all the channels you receive into its memory.

5

Wait for a few minutes while the VCR programs chan- nels. When programming is complete, AUTO SET COMPLETED will appear on-screen. Then, the programming of the lowest chan- nel number placed in the VCR’s memory will appear on-screen. Now when you press the CHANNEL Up/Down buttons, you will scan only through channels you receive.

5Wait for the VCR to program channels.

1	CBL/DSS	VCR	TV
	PAUSE/STILL	POWER	MUTE
	REW	PLAY	FF
	EJECT	STOP	F.ADV
	VCR PLUS+/ENTER
	EXIT/STATUS		CLEAR
		MENU
	JOG/SHUTTLE
	VOL		CHANNEL

3	1	2	3	2
	4	5	6
	7	8	9	4
	100	0	GO-TO

REC /OTR	INDEX	MEMO
	VAR.
	SLOW
SPEED	VCR/TV SLOW	TRACKING SKIP

SEARCH

REMOTE LOCATOR

Helpful Hints

•If the channel you select has no broadcast, the screen will be solid blue. The screen will remain blue until you select an active channel.

•Line Input mode will always be stored in the VCR’s memory as channel 00. When you press Number buttons 00, A/V IN will appear on-screen and L will appear on the display panel of the VCR. To exit Line Input mode, use the CHANNEL Up/Down buttons to select a channel other than 00.