Acer G700 series, G701 Configuring the hot-swappable cage

Configuring the hot-swappable cage

This section includes instructions for removing and installing the

hot-swappable cage as well as procedures on how to install a hard disk

into the cage’s hard disk carrier.

Note: The hot-swap SCSI HDD Cages can not be cascaded for

Altos G701 model.

Important: Before detaching the hot-swappable cage from the

chassis, make sure to first remove all hard disks from their carriers.

For instructions, refer to the succeeding section.

1 Detach the chassis panels and remove the air baffle.

2 Loosen the four thumbscrews that secure the cage to the chassis

(1).

3 Slightly pull out the cage from the chassis (2).

4 Disconnect the following cables from the cage:

aSCSI cable

AA G701 - EN.book Page 37 Tuesday, February 25, 2003 5:19 PM