Cisco Systems 12000/10700 V3.1.1 Access List Configuration Window-Detailed Description, 11-12

Chapter 11 Layer 3 QoS

Access List Configuration

Access List Configuration Window—Detailed Description

The Access List Configuration window contains one button, Create. The Create button is used to create an access list. When you choose Create, a new access list of type IP standard is created and the next available index is assigned. The access list type can be changed and saved if desired. When the access list type is changed, the index can be manually or automatically reallocated to the next available index for the new type selected.

The Access List Configuration window displays five tabs: General, IP Standard, IP Precedence, MAC, and IP Extended.

Note The General tab is always accessible. One of the corresponding tabs, based on the access list type, is also accessible. Any non-relevant tabs are grayed out. The fields in all the tabs are populated with default values. The fields can be changed as desired.

General Tab

The General tab contains a single General tab.

General

The General tab displays four fields:

Index Allocation Mode—Possible values are Manual or Automatic. When the access list type is changed, the index can be manually or automatically reallocated to the next available index for the new type selected.

Index—Identification number for an access list. The Index field is automatically generated if the Index Allocation Mode is set to Automatic.

Type—Lists the type of access list. Possible types include: IP Standard, IP Precedence, MAC and IP Extended.

Logging Level—(This field is only applicable to IP standard and IP extended access lists). If you enable the logging level, then informational messages about the packet that matched the criteria specified in the access list are generated.

	Cisco 12000/10700 v3.1.1 Router Manager User Guide
11-12	OL-4455-01