Cisco Systems 12000/10700 V3.1.1 manual DS3/E3 Interface Status, Fault Tab

Chapter 9 Interface Status

DS3/E3 Interface Status

Step 2 Choose a Chassis, Module, and ATM Interface from the lists displayed at the left of the window. The fault information is displayed for the selected ATM interface.

ATM Interface Faults Window—Detailed Description

The ATM Interface Faults window displays a single Fault tab.

Fault Tab

The Fault tab (see Figure 9-3) displays three areas: General Errors, SONET Frame Errors, and DS1/E1/DS3/E3 Errors.

General Errors

The General Errors area is not applicable to Cisco 12000/10720 Router Manager.

SONET Frame Errors

The SONET Frame Errors area displays the following information:

Path FEBE Errors—Number of G1 (path FEBE) errors on the physical interface.

Line FEBE Errors—Number of Z2 (line FEBE) errors on the physical interface.

Path Parity Errors—Number of B3 (BIP) errors on the physical interface.

Line Parity Errors—Number of B2 (BIP) errors on the physical interface.

Section Parity Errors—Number of B1 (BIP) errors on the physical interface.

DS1/E1/SD3/E3 Errors

The DS1/E1/DS3/E3 Errors area is not applicable to Cisco 12000/10720 Router Manager.

DS3/E3 Interface Status

The DS3/E3 Interface Status section covers the following areas:

•Viewing the DS3/E3 Interface Status Window

•DS3/E3 Interface Status Window—Detailed Description

Viewing the DS3/E3 Interface Status Window

To view the DS3/E3 Interface Status window, proceed as follows:

Step 1 Right click on the DS3/E3 interface object and choose Cisco 12000/10720 Manager>Fault> Interface>DS3> Status. See Table 9-2 on page 9-2for information on which objects allow you to launch the DS3/E3 Interface Status window.

Cisco 12000/10700 v3.1.1 Router Manager User Guide

OL-4455-01 9-9