Cisco Systems 12000/10700 V3.1.1 manual DeviceisMaster default policy, Policy Name Value, 12-5

Chapter 12 Managing ATM Connections

ATM Connection Synchronization

•Data has been provisioned onto the device via Cisco 12000/10720 Router Manager but a Write Mem has not been performed. The device then reboots. The newly provisioned data is modeled in Cisco 12000/10720 Router Manager but not on the device.

•Auto synchronization is initiated automatically every 30 minutes on the device.

The policies that are available for ATM connection synchronization are described in the Table 12-2.

Table 12-2 ATM Connection Synchronization Policies

Policy Name	Value
Normal	0
Device_is_Master (default policy)	1
CEMF_is_Master_After_First_Sync	2

Device_is_Master (default policy)

The Device_is_Master policy creates new PVC connection objects in the EM, for the connections available on the device. In case connection object that is available in the EM is removed from the device, then the Device_is_Master policy moves the connection object into the decommissioned state during the next synchronization. If the same object with the same configuration details is again added to the device, the Device_is_Master policy identifies the object and moves it to the normal state. However if a new connection object is added to the device with different configuration details, then the Device_is_Master policy creates the connection object in the EM and moves it to the normal state. The ATM Connection synchronization never deletes any ATM connection object.

Syntax for Set:

cd <CEMF_ROOT>/bin

./objectUtilsTestRig setIntValue "ComponentManaged:<absolute-path of the chassis>" ciscoPlatformCon:CiscoChassis-MIB.DeleteConnections 0

For policy information, see Table 12-2

./objectUtilsTestRig setIntValue "ComponentManaged:<absolute-path of the chassis>" ciscoPlatformCon:CiscoChassis-MIB.DeleteConnections 1

For policy information, see Table 12-2

./objectUtilsTestRig setIntValue "ComponentManaged:<absolute-path of the chassis>" ciscoPlatformCon:CiscoChassis-MIB.DeleteConnections 2

For policy information, see Table 12-2

Syntax for Get:

./objectUtilsTestRig getAttrValue "ComponentManaged:<absolute-path of the chassis>" ciscoPlatformCon:CiscoChassis-MIB.DeleteConnections

Table 12-3 DeviceIsMaster Policy

	VCL in Cisco EMF	VCL State		VCL on Device	Behavior
	Present	Normal		Not Present	Remove from
					Cisco EMF
			Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01						12-5