BGP Address Family Configuration | Cisco Systems 12000/10700 V3.1.1

Chapter 14

Routing

BGP Address Family Configuration

BGP Address-Family Synchronization—Detailed Description

The BGP Address-Family Synchronization window displays a single tab: Synchronization.

Synchronization Tab

The Synchronization tab consists of a single area: BGP Address Family Synchronization.

Synchronization Status—Displays the status of the synchronization process.

Action

Synchronize—Uploads the existing BGP address families in the device to the EM.

Note The uploaded BGP address families are listed in the “Address Family List” in the BGP Address-Family Configuration window.

BGP Address Family Configuration

The BGP Address Family Configuration window allows the user to create, remove and configure BGP address families. This section covers the following topics:

•Viewing the AF-General Tab on the BGP Address-Family Configuration Window

•AF-GeneralTab—Detailed Description

•Configuring Address Family

•Configure Address Family—Detailed Description

•Modifying BGP Address Family

•BGP Address Family-Modify Address Family Parameters—Detailed Description

•Viewing the AF-Network Tab on the BGP Address-Family Configuration Window

•AF-NetworkTab—Detailed Description

•BGP Address Family—Network Configuration

•BGP Address Family-NetworkConfiguration—Detailed Description

•Viewing the AF-Neighbor Tab on the BGP Address-Family Configuration Window

•AF-NeighborTab—Detailed Description

•BGP Address Family—Neighbor Configuration

•BGP Address Family-NeighborConfiguration—Detailed Description

•Viewing the AF-Redistribute Tab on the BGP Address-Family Configuration Window

•AF-RedistributeTab—Detailed Description

•BGP Address Family—Redistribute Configuration

•BGP Address Family-Configure Redistribute Protocol—Detailed Description

	Cisco 12000/10700 v3.1.1 Router Manager User Guide
14-26	OL-4455-01

Image 416

Cisco Systems 12000/10700 V3.1.1 BGP Address Family Configuration, BGP Address-Family Synchronization-Detailed Description

Contents

Cisco 12000/10700 v3.1.1 Router Manager User Guide Corporate Headquarters Cisco 12000/10700 v3.1.1 Router Manager User Guide N T E N T S Iii Views Object States Chassis Fault Management Window-Detailed Description RPR Status Viewing the RPR Status Window Vii Module Performance Window-Detailed Description Viii Interface Configuration SRP Interface Side Configuration Sonet Interface Status Virtual Tributary Tab Xii CAR Policy Configuration Xiii Xiv Deleting an Existing ToFab policy OAM tab Configuration Tab Xvi BGP-Details14-21 Xvii Redistribute Information Xviii Mpls Interface Status Xix Interface VRF Status Mpls Trap Management Xxi Archiving Xxii Running Configs C-4 CE1 C-4 PE1 C-5 PE2 C-11 CE2 C-12 Xxiii Xxiv Document Audience Xxv Xxvi Chapter Number Chapter Title ContentDocument Organization Managing VLANs Xxvii Command Conventions ConventionsExample Conventions Format Description Example Obtaining Documentation Document ConventionsCisco.com Xxix Documentation CD-ROM Ordering DocumentationDocumentation Feedback Xxx Xxxi Obtaining Technical AssistanceTechnical Assistance Center Obtaining Additional Publications and Information Cisco TAC WebsiteCisco TAC Escalation Center Xxxii Xxxiii Xxxiv Overview A P T E R Cisco 12000/10720 Router Manager Software Cisco Element Manager Framework Cisco EMF Software Overview Accessing Online Help Concepts Physical Objects See Physical Interfaces and Technologies section on Cisco 12000/10720 Router Chassis Cisco 12016 Chassis Physical Interfaces and Technologies Supporting ModulesLinecards Logical Objects POS Logical Object Management Functions You Can Perform Use of Telecom Graphics ObjectsLogical Object Management Functions Sample Telecom Graphical Object Sample Cisco 12000 Chassis Showing Telecom Graphical Objects OSI Mappings Views Component Managed View Layer 3 QoS View Network ViewPhysical View Vlan View Cisco 12000/10720 Router Manager Object States Cisco 12000/10720 Router Manager Object States Errored Decommissioned StateNormal State Performance Logging On Lost Comms Discovery Lost CommsMismatched Transient Object States OL-4455-01 Getting Started Cisco 12000/10720 Router Manager Workflow ATM Starting Cisco EMF and Cisco 12000/10720 Router Manager Starting a Cisco EMF User Session Login window see -2 appears Launchpad Launching an Application Access Map Viewer ViewerGroups Event Browser Events Event Groups Notification ProfilesThresholding Regimes PreFilter DeploymentQuitting a Cisco EMF User Session Deployment Process Outline Manually Deploying a Generic Site Object Deployment Process Workflow Choose DeploymentDeploy Generic Objects Deployment Wizard Templates Window Deployment Wizard Object Parameters Window 1 Deployment Wizard Object Parameters Window 2 Deployment Wizard Views window appears Object Selector Window appears 11 Deployment Wizard-Views Window 12 Deployment Wizard-Summary Window IP Auto Discovery of the Cisco Chassis Manually Deploying a Cisco 12000/10720 Chassis 14 Example of Auto Discovery 15 Deployment Wizard-Object Parameters 1 16 Deployment Wizard-Object Parameters Window 3 Click on Select. The Object Selector window appears 18 Object Selector Window 20 Deployment Wizard Summary Commissioning and Subchassis Discovery 21 Before Subchassis Discovery Commissioning a Chassis 22 Chassis Configuration Window 23 After Subchassis Discovery Object States Manually Deploying ModulesDecommissioning a Chassis User Named vs. Auto Named Module Deployment Manually Deploying a GRP Card 24 Deployment Wizard-Templates 25 Deployment Wizard-Object Parameters Click Select. The Object Selector window appears 27 Object Selector Window 28 Deployment Wizard-Views 29 Deployment Wizard-Summary Card Type Menu Option Card Description Manually Deploying Line CardsLine Cards Supported by Cisco 12000 Series Routers SR-SC LR-SC Ethernet Line Cards Supported by Cisco 12000 Series Routers Cisco 12000/10720 Router Manager Menu Option Card Description Line Cards Supported by Cisco 10720 Routers POS LR2 30 Deployment Wizard-Templates 31 Deployment Wizard-Object Parameters 32 Deployment Wizard-Views 33 Object Selector Window 34 Deployment Wizard-Views Deployment Wizard-Summary window appears Card Card Type Card Description Manually Deploying Supporting ModulesDeploying a Clock Scheduler Card 36 Deployment Wizard-Views 37 Object Selector Window 38 Deployment Wizard-Views 39 Deployment Wizard-Summary Deploying a Switch Fabric Card 40 Deployment Wizard-Views 41 Object Selector Window 42 Deployment Wizard-Views Pre-deployment 43 Deployment Wizard-Summary Performing Pre-deployment OL-4455-01 Managing Chassis Manager Window/Task Launching the Chassis Management WindowsMenu Options to Select to Open Window Management Information Viewing the Management Information Window System Configuration Management Information Window-Configuration Tab Entering or Changing IOS CLI Username and Passwords Choose the IOS/Command Line Security tab Configuration Tab IOS/Command Line Security TabSystem Configuration IOS Username and Passwords Chassis Configuration Viewing the Chassis Configuration Window Commissioning a Chassis Decommissioning a Chassis Starting Global Performance Logging Action Report Window Stopping Global Performance Logging Entering Additional Descriptions for a Selected Chassis Choose the Additional Descriptions tab Device Management Tab in Configuration Window Choose the Device Management tab Chassis Configuration Window-Detailed Description Snmp Management Additional Descriptions TabDevice Management Tab Commission Status Viewing the Snmp Management Window Modifying Snmp Community Names or Version Community Names Enabling or Disabling Trap GenerationSnmp Management Window-Detailed Description Chassis Inventory Viewing the Chassis Inventory WindowVersion Trap Generation Chassis Inventory Window-Detailed Description General Tab Asset Tracking Tab Chassis Fault Management Viewing the Chassis Fault Management Window 10 Chassis Fault Management Window-General Tab 11 Chassis Fault Management Window-Power Supply Tab 12 Chassis Fault Management Window-Temperature Tab 13 Chassis Fault Management Window-Fan Tab Changing Column Width Chassis Fault Management Window-Detailed Description Power Supply TabChassis Availability LED Status Temperature Tab TemperatureFan Tab Voltage Command Log Viewing the Command Log Window Command Log Details Table Command Log Window-Detailed DescriptionCommand Log Details Tab Event History Details System LogViewing the SysLog Messages Window System Log Window-Detailed Description SysLog Message Tab Sys Log Message Details Using RME for Chassis Management TasksSysLog Messages Area Configuration Backup/Restore Using RME IOS Image Download Using RMEAPS Status Viewing the APS Status Window 16 APS Status Window APS Circuits Area Initiating a Telnet ServiceAPS Status Window-Detailed Description Launching the Web Console Configuration EditorViewing the Configuration Editor Window 18 Configuration Editor Window Configuration Editor Window-Detailed Description Searching in the Configuration EditorConfiguration Editor Tab Selection RPR Configuration Viewing the RPR Configuration WindowOperations on Device Operations Done Locally RPR Configuration Window-Detailed Description 19 RPR Configuration Window Viewing the RPR Status Window Switch Over TabRPR Status RPR Status Window-Detailed Description RP Status LC Status IP Routing StatusViewing the IP Routing Status window Cidr Info IP Routing Status Window-Detailed DescriptionClassless Inter-Domain Routing Tab TCP Status Viewing the TCP Status Window 22 TCP Status Window TCP Status TCP Status Window-Detailed DescriptionTCP Status Tab TCP Connections Tab Connections Table UDP Status Viewing the UDP Status Window UDP Status Window-Detailed Description Status UDP Port Information Cisco 12000/10720 Router Manager Module Names Module Abbreviation Launching the Module Management Windows Cisco 12000/10720 Router Module Configuration Viewing the Configuration Window Configuration Window Commissioning a Selected Module Decommissioning a Selected Module To decommission a module, proceed as follows Viewing the Module Fault Management Window Module Fault ManagementModule Configuration Window-Detailed Description Module Fault Management Window-Detailed Description Module Availability Module Performance Cisco Contact Details Viewing the Module Performance Window Starting or Stopping Performance Logging Performance Logging Module Performance Window-Detailed DescriptionCPU Usage Module Inventory Viewing the Module Inventory Window Module Details Module Inventory Window-Detailed DescriptionGeneral Asset Tracking Slot & Ports Managing Interfaces Interface Interface Profiles Interface Profile Types Launching the Interface Profile Windows Creating an ATM Interface Profile Not applicable for Cisco 12000/10720 Router Manager Prompt Window Editing an Existing ATM Interface Profile Deleting an Existing ATM Interface Profile Configuration 1 Tab ATM Configuration Configuration 2 Tab Ilmi ConfigurationInformation Element Layer Physical Layer Creating an Hsrp Profile Hsrp Profile Window Editing an Existing Hsrp Interface Profile Hsrp Profile Parameters Area Deleting an Existing Hsrp Interface ProfileHsrp Profile Window-Detailed Description Creating a POS Interface Profile Actions POS Profile Dialog -POS Config Tab Editing an Existing POS Interface Profile POS Config Tab Deleting an Existing POS Interface ProfilePOS Profile Window-Detailed Description General Sonet Overhead Alarm Reporting & ThresholdAlarm Reporting Creating a SRP Side Profile 11 SRP Side Profile Window 12 SRP Side Profile Window-Alarms tab Editing an Existing SRP Side Profile Deleting an Existing SRP Side Profile SRP Side Profile Window-Detailed Description 14 Deletion Prompt Window Reporting and Threshold Alarms TabCreate Profile Reporting Interface Configuration Interfaces and Related Technology-Specific Windows Launching the Interface Configuration Windows Interfaces Generic Interface Configuration Viewing the Generic Interface Configuration Window Configuring and Commissioning a Generic Interface Decommissioning an Interface Generic Interface Configuration Window-Detailed DescriptionConfigurable Parameters ATM Interface Configuration Viewing the ATM Interface Configuration Window Configuring an ATM Interface ATM Interface Configuration Window-Configuration 1 Tab ATM Interface Configuration Window-Detailed Description Ethernet Interface Configuration Viewing the Ethernet Interface Configuration Window Ethernet Interface Configuration Window-Configuration Tab Configuring an Ethernet Interface Ethernet Interface Configuration Window-HSRP Parameters Tab Ethernet Interface Configuration Window-Detailed Description Hsrp Parameters Tab IP Configuration Hsrp Parameters Viewing the IP Configuration Window Configuring an IP Interface POS Interface Configuration IP Configuration Window-Detailed DescriptionViewing the POS Interface Configuration Window Generic Parameters Tab Configuring a POS Interface POS Interface Configuration Window-POS Config Tab POS Interface Configuration Window-Detailed Description BER TCA APS Interface Configuration Viewing the APS Configuration Window APS Configuration Window-APS Tab Adding a Working Interface Removing a Working InterfaceAdding a Protected Interface Removing a Protected Interface APS Interface APS Configuration Window-Detailed DescriptionAPS Tab SRP Interface Configuration Viewing the SRP Interface Configuration Attributes Configuring a SRP Interface SRP Interface Configuration Window-Detailed Description SRP Interface Side Configuration Viewing the SRP Interface Side Configuration Attributes Configuring a SRP Side 10 SRP Side Configuration window-Alarms tab SRP Interface Side Configuration Window-Detailed Description Alarms Tab OL-4455-01 Interface Status Interface Type Launching the Interface Status Windows Generic Interface Status Viewing the Generic Interface Status Window Generic Interface Status Window-Detailed Description Interface DetailsLast Change Details Transmission Details ATM Interface Status Viewing the ATM Interface Status Window ATM Interface Status Window-Detailed Description ATM Transmit Status ATM Receive Status Physical Layer StatusATM Port Status Action ATM Interface Faults Viewing the ATM Interface Faults Window ATM Interface Faults Window-Detailed Description Fault TabDS3/E3 Interface Status Viewing the DS3/E3 Interface Status Window DS3/E3 Interface Status Window-Detailed Description Status Tab DS3/E3 Status Far End DS3/E3 Status Sonet Interface Status Viewing the Sonet Interface Status Window Sonet Interface Status-Section Tab Choose the Line tab, if required see Figure Choose the Path tab, if required see Figure Sonet Status Window-Detailed Description MediumSection Line Virtual Tributary SRP Interface StatusViewing the SRP Interface Status Attributes SRP Interface Status Window-Detailed Description Interface TabSide a Frame Side B Frame SRP Side IPS Status Viewing the IPS Status Attributes SRP Topology Map IPS Status Window-Detailed DescriptionViewing the SRP Topology Map IPS Status SRP Topology Map-Detailed Description Topology Map OL-4455-01 Interface Performance 10-1 Launching the Interface Performance Windows 10-2 10-3 Generic Interface PerformanceViewing the Generic Interface Performance Window 10-4 Interface Performance Window-Performance 2 Tab Starting Performance Logging for a Selected Interface 10-5 10-6 Start Performance Logging Confirmation Window Stopping Performance Logging for a Selected Interface 10-7 Generic Interface Performance Window-Detailed Description Performance 1 TabGeneral Information Packets/Octets Statistics Error Statistics Performance 2 TabPerformance Logging 10-9 Sonet Interface Performance Viewing the Sonet Interface Performance WindowPerformance 3 Tab Packets/Octets Statistics High Capacity 10-11 Sonet Interface Performance-Section Tab 10-12 Sonet Interface Performance-Line Tab 10-13 10 Sonet Interface Performance-Path Tab Sonet Performance Window-Detailed Description Section TabLine Tab Line DS3/E3 Interface Performance Viewing the DS3/E3 Interface Performance WindowPath Tab Virtual Tributary Tab 10-16 11 DS3/E3 Interface Performance Window-DS3 Performance Tab 10-17 DS3/E3 Interface Performance Window-Detailed DescriptionDS3 Performance Tab E3 Performance Tab 10-19 Ethernet Interface PerformanceViewing the Ethernet Interface Performance Window Ethernet Interface Performance Window-Detailed Description General StatisticsCollision Statistics 10-20 10-21 SRP PerformanceViewing the SRP Performance Window 10-22 15 SRP Performance window-Outer Ring tab 10-23 16 SRP Performance Window-Inner Ring Tab SRP Performance Window-Detailed Description 10-24 Counters for last x seconds UtilizationData Traffic 10-25 Outer Ring Tab 10-26 Inner Ring Tab 10-27 SRP Side Performance Side TabSide a Data Traffic Bytes Side B Data Traffic Bytes Viewing the SRP Side Performance Window 10-29 10-30 19 SRP Side Performance window-Host tab SRP Side Performance Window-Detailed Description Ring TabPackets Packets Out 10-32 Host TabOctets Out Errors Tab RingHost 10-33 10-34 Launching the Layer 3 QoS Windows 11-1 11-2 Layer 3 QoSMenu Options to Launch Access Lists Committed Access Rate CARWeighted Random Early Detection Wred CAR and Wred Overview Towards the Fabric ToFab Mdrr OverviewMdrr in Cisco 12000/10720 Router Manager 11-4 11-5 Implications of Engine TypeCAR and Wred in Cisco 12000/10720 Router Manager CAR Policy Configuration Workflow for CARPer Interface Rate Control Pirc Support 11-6 11-7 Limited Support for EngineCreating a CAR Policy Applying an Access List to a CAR Policy 11-8 CAR Policy Configuration Window-Detailed Description CAR Policy Configuration TabAccess List Choice CAR Parameters Access List Configuration Creating Access ListsExceed Action 11-10 Access List Configuration-General Tab 11-11 Access List Configuration Window-Detailed Description 11-12 11-13 IP Standard TabIP Standard 11-14 IP Precedence TabIP Precedence MAC 11-15 IP Extended Tab IP ExtendedValid Protocol Names 11-16 Dynamic List Source and DestinationPort 11-17 11-18 CAR Policy ApplyApplying a CAR Policy to an Interface 11-19 Removing a CAR Policy from an InterfaceEditing or Deleting a CAR Policy 11-20 CAR Policy Apply Window-Detailed DescriptionCAR Policy Apply Tab CAR Policy Status Viewing the CAR Policy Status WindowApply Status 11-21 11-22 Workflow for WRED/DRREngine Type Support for Wred 11-23 CoS Queue Group ConfigurationCreating a CoS Queue Group Under Wred 11-24 Editing an Existing CoS Queue GroupDeleting an Existing CoS Queue Group 11-25 CoS Queue Group Configuration Window-Detailed DescriptionCoS Queue Group Tab Wred Parameters 11-26 DRR Tab DRR MappingDRR Queue 11-27 11-28 Wred Tx ConfigurationApplying a CoS Queue Group to an Interface 13 Wred Tx Configuration Window 11-29 11-30 Removing a CoS Queue Group from an InterfaceChanging the Association of a CoS Queue Group Wred Tx Configuration Window-Detailed Description Tx Config TabAvailable COS Queue Group Associated COS Queue Group Info 11-32 Wred ToFab ConfigurationCreating a ToFab Policy Editing an Existing ToFab policy 11-33 Deleting an Existing ToFab policy 11-34 Wred ToFab Policy Configuration Window-Detailed Description ToFab Policy Configuration tabSlot Table Parameters Slot-CosQ Groups 11-36 Wred Rx ConfigurationAssociating a ToFab Policy to a Line card 11-37 Disassociating a ToFab Policy from a Line cardChanging the Association of a ToFab Policy Wred Rx Configuration Window-Detailed Description Rx Configuration TabAssociated slot-Table Info Apply Status Managing ATM Connections 12-1 12-2 PVC ConnectionsTerminating PVC Connections SVC Connections 12-3 12-4 Launching the ATM Connections WindowsATM Connection Synchronization DeviceisMaster default policy Policy Name ValueVCL in Cisco EMF VCL State VCL on Device Behavior 12-5 12-6 Normal PolicyCEMFisMasterAfterFirstSync 12-7 Creating ATM ConnectionsUploading Existing ATM Connections and QoS Profiles Configuring the Management Password Information Without configuring the Management Password InformationNaming Convention for the Uploaded Connection Objects 12-8 Viewing the ATM Connection Upload Window 12-9 Uploading Existing ATM Connections and ATM QoS Profiles 12-10 ATM Connection Upload Window-Detailed Description Connection Upload TabUpload 12-11 12-12 Managing ATM QoS ProfilesCreating ATM QoS Profiles ATM QoS Profiles Configuration Window-Profile Tab 12-13 Editing an ATM QoS Profile 12-14 Deleting an ATM QoS Profile 12-15 12-16 10 Deployment Wizard-Summary Window ATM QoS Profiles Configuration Window-Detailed Description Profile TabRxTx Parameters Tab Category Deploying ATM Connection Objects Deploying a PVC ObjectObject Type to be 12-19 12 Deployment Wizard-Templates 12-20 14 Deployment Wizard-Object Parameters 12-21 15 Object Selector Window Deploying an SVC Object 12-22 12-23 18 Deployment Wizard-Object Parameters 12-24 19 Deployment Wizard-Object Parameters 12-25 20 Deployment Wizard-Views 12-26 21 Deployment Wizard-Object Selector 12-27 22 Deployment Wizard-Object Parameters Applying an ATM QoS Profile to an ATM Connection 12-28 12-29 24 ATM QoS Profiles Management-Profile Tab 12-30 ATM PVC ConfigurationViewing the ATM VCL Configuration Window Connecting or Disconnecting a PVC 12-31 12-32 Decommissioning or Re-Commissioning a PVCATM OAM Ping 27 ATM VCL Configuration-OAM Ping tab 12-33 ATM VCL Configuration Window-Detailed Description Traffic InformationEncapsulation Parameters 12-34 Layer 3 Configuration Tab VCL ConfigOAM Information Interface OAM Ping Tab SubscriberOAM Parameters OAM Ping Parameters 12-37 SVC ConfigurationViewing the SVC Configuration Window Connecting or Disconnecting an SVC SVC Configuration Window-Detailed DescriptionConfiguration Decommissioning or Recommissioning an SVC 12-39 SVC ParametersVC Parameters PVC Status 12-40 ATM VCL Status Window-Detailed Description PVC StatusSoft PVC Details 12-41 Characteristics OAM tabOAM Details Auto Detect Statistics Launching the Vlan Windows 13-1 Vlan Synchronization 13-2 13-3 Vlan Synchronize Window 13-4 Deploying Vlan objectsDeploying a Domain 13-5 Deploying a Vlan object 13-6 Deployment Wizard-Object Parameters Window 13-7 13-8 10 Deployment Wizard-Templates Window 13-9 11 Deployment Wizard-Object Parameters Window 13-10 13-11 14 Deployment Wizard-Views 13-12 13-13 16 Deployment Wizard-Views 13-14 Vlan ConfigurationViewing the Vlan Configuration Window Commissioning a Vlan 13-15 Decommissioning a Vlan 13-16 Start Performance Logging 13-17 Stop Performance Logging 13-18 Vlan Configuration Window-Detailed Description Vlan PerformanceStatus 13-19 Viewing the Vlan Performance Window 13-20 13-21 Reparenting VLANs and Vlan Sub-InterfacesVlan Performance Window-Detailed Description Deleting Vlan Objects 13-22 13-23 26 Deployment Wizard-Summary 13-24 Launching the Routing Windows 14-1 BGP Management 14-2 14-3 BGP ConfigurationViewing the BGP Details Tab on the BGP Configuration Window 14-4 BGP Details Tab-Detailed DescriptionBGP General 14-5 Enabling BGP on a ChassisBGP Information Enable BGP Window-Detailed Description 14-6 Modifying BGP on a Chassis 14-7 14-8 BGP Modify Window-Detailed DescriptionDisabling BGP on a Chassis Viewing the Network Tab on the BGP Configuration Window 14-9 14-10 Network Tab-Detailed DescriptionBGP Network Information 14-11 BGP Network ConfigurationBGP Network Configuration Window-Detailed Description Viewing the Neighbor Tab on the BGP Configuration Window 14-12 BGP Neighbor Configuration Neighbor Tab-Detailed DescriptionBGP Neighbor Information 14-13 BGP Neighbor Configuration Window-Detailed Description 14-14 BGP Configuration Window-Redistribution Tab 14-15 BGP Redistribute Configuration Redistribution Tab-Detailed DescriptionBGP Redistribution Information 14-16 BGP Redistribute Configuration-Detailed Description 14-17 14-18 BGP StatusViewing the BGP Status Window 14-19 12 BGP Status-Network Tab 14-20 13 BGP Status-Neighbor Tab BGP Status Window-Detailed Description BGP-DetailsBGP General BGP Information Network NeighborBGP Network Information BGP Neighbor Information BGP Address-Family Synchronization RedistributionBGP Redistribution Information 14-23 14-24 15 BGP Address-Family Synchronization Window 14-25 16 Action Report BGP Address Family Configuration BGP Address-Family Synchronization-Detailed DescriptionSynchronization Tab 14-26 18 BGP Address-Family Configuration Window 14-27 Configuring Address Family AF-General Tab-Detailed DescriptionBGP Address Family Information 14-28 14-29 Configure Address Family-Detailed DescriptionAdd Address Family Modifying BGP Address Family 14-30 Modify Address Family Parameters 14-31 21 BGP Address-Family Configuration Window-AF-Network Tab 14-32 BGP Address Family-Network Configuration AF-Network Tab-Detailed DescriptionNetwork Information 14-33 Add/Remove Network 14-34 23 BGP Address-Family Configuration Window-AF-Neighbor Tab 14-35 BGP Address Family-Neighbor Configuration AF-Neighbor Tab-Detailed DescriptionNeighbor Information 14-36 Add/Remove Neighbor 14-37 14-38 14-39 AF-Redistribute Tab-Detailed DescriptionRedistribute Information BGP Address Family-Redistribute Configuration 14-40 BGP Address-Family Status Viewing the BGP Address-Family Status windowAdd/Remove Redistribution Information 14-41 14-42 27 BGP Address-Family Status Window 14-43 28 BGP Status-AF-Network Tab 14-44 29 BGP Status-AF-Neighbor Tab BGP Address-Family Status Window-Detailed Description AF-GeneralBGP Address Family Information 14-45 AF-Redistribute AF-NetworkAF-Neighbor Ospf Configuration Viewing the Ospf Configuration WindowOspf Management 14-47 14-48 Config Tab-Detailed DescriptionConfig Adding an Ospf Process 14-49 Removing an Ospf Process 14-50 14-51 Viewing the Network Tab on the Ospf Configuration WindowOspf Network Configuring a Network 14-52 14-53 37 Action Report Configure Network-Detailed Description Configure NetworkOspf Status Viewing the Ospf Status Window 14-55 39 Ospf Status Window 14-56 40 Ospf Status-Process Information Tab 14-57 41 Ospf Status-Area Tab 14-58 42 Ospf Status-Interface Tab 14-59 43 Ospf Status-Neighbor Tab 14-60 44 Ospf Status-Link State Tab 14-61 Ospf Status-Detailed DescriptionGeneral Group Process Information AreaProcess Summary Network Details Interface Stub AreaArea Range 14-63 14-64 Interface MetricVirtual Interface 14-65 NeighborVirtual Neighbor Link State HostLsdb Hosts Introduction 15-1 Mpls Management Workflow 15-2 15-3 Launching the Mpls Management WindowsWindow/Task Menu Options to Select to Open Window 15-4 Mpls Forwarding InformationViewing the Mpls Forwarding Information Window 15-5 Mpls Forwarding Information Window-Detailed DescriptionMpls Forwarding Information Tab Fault Management for Mpls LSR Interfaces Mpls Interface StatusViewing the Mpls Interface Status Window 15-6 Interface Configuration Tab Mpls Interface Status Window-Detailed DescriptionGeneral 15-7 15-8 Mpls Interface InformationViewing the Mpls Interface Information Window Interface Setup Tab Mpls Interface Information Window-Detailed DescriptionSelect Interface 15-9 Mpls Setup Tab 15-10 Interface Performance Tab 15-11 Mpls Performance Tab 15-12 15-13 Mpls Interface Information Window-MPLS Performance Tab Performance Management for Mpls LSR Interfaces Mpls Interface PerformanceViewing the Mpls Interface Performance Window 15-14 Mpls Interface Performance Window-Detailed Description General Performance Statistics TabCounters 15-15 15-16 Mpls Performance Statistics TabHigh Speed Counters 15-17 Incoming DirectionOutgoing Direction Fault Management for Mpls LDP Mpls LDP Entity Status WindowViewing the Mpls LDP Entity Status Window 15-18 15-19 Mpls LDP Entity Status Window-Detailed DescriptionEntity Tab General LDP Status 15-20 15-21 Entity Statistics TabEntity Statistics General Label Range Tab 15-22 General Label Range 15-23 15-24 ATM Parameters TabATM Parameters 15-25 ATM Label Range TabATM Label Range 15-26 Mpls LDP Hello AdjacenciesViewing the Mpls LDP Hello Adjacencies Window Mpls LDP Hello Adjacencies Window-Detailed Description Hello Adjacencies TabHello Adjacencies 15-27 15-28 Mpls LDP Peer StatusViewing the Mpls LDP Peer Status Window Mpls LDP Peer Status Window-Detailed Description Peers TabSessions Tab LDP Peers LDP Sessions 15-30 15-31 Session Statistics TabLDP Session Statistics 15-32 ATM Sessions TabLDP ATM Session Fault Management for Mpls Traffic Engineering Mpls Tunnel InformationViewing the Mpls Tunnel Information Window 15-33 15-34 Mpls Tunnel Information Window-Detailed DescriptionSelect Tunnel Tab 15-35 Head Tunnel Setup TabSelect Tunnel Tunnel Info 15-36 15-37 Tunnel StatusAdvanced Head Tunnel Hops Tab 15-38 15-39 LSP Setup TabHop Table 22 Mpls Tunnel Information Window-LSP Setup Tab 15-40 15-41 LSP Hops Tab 15-42 15-43 Actual Route HOP TableComputed HOP Table LSP Resource Tab 15-44 Performance Tab Resource TableTunnel Performance 15-45 15-46 Introduction to VRF Management 16-1 VRF Management Workflows Launching the Mpls VRF Management WindowsRouter Manager Window 16-2 16-3 Creating VRF Objects in the EMDeploying VRF Objects 16-4 Deploying a VRF Object 16-5 Deployment Wizard Views 16-6 Object Selector Window 16-7 Deployment Wizard-Views 16-8 Creating and Configuring the VRF Policy on a DeviceConfiguring and Creating a VRF Policy on a Selected Chassis VRF Configuration Window 16-9 Removing a VRF Policy from a Selected Chassis Adding a Routing Target to a Selected ChassisDeleting a Routing Target from a Selected Chassis 16-10 VRF Configuration Window-Detailed Description VRF Configuration Tab Associating a VRF Policy with an Interface Device ActionExport Import Associating VRF Policies 16-13 Removing a VRF Policy from a Selected Interface VRF Association Window-Detailed DescriptionVRF Tab Available VRF Policies VRF Fault Management VRF StatusViewing the VRF Status Window 16-15 16-16 VRF Status Window-Detailed DescriptionVRF Details Performance and Security Tab 16-17 16-18 PerformanceSecurity 16-19 Interface VRF StatusViewing the Interface VRF Status Window Interface VRF Status Window-Detailed Description VPN StatusInterface VRF Association Tab Viewing the VPN Status Window VPN Status Window-Detailed Description 16-21 16-22 Routes TabVRF Routes Route Targets Tab 16-23 VRF Route Targets 16-24 16-25 BGP Neighbor TabInterface MPLS/EBGP Neighbor 16-26 VRF Object StatusViewing the VRF Object Status Window VRF Object Status Window-Detailed Description 16-27 Routes 16-28 16-29 Route Targets 16-30 16-31 Interface Association TabInterface Association Performance Tab 16-32 Trap Alarm Description Severity Clears 17-1 17-2 Enabling/Disabling Traps on the Device 17-3 17-4 Mpls Trap Configuration Window-Detailed DescriptionTraps Tab 17-5 Mpls CLI Troubleshooting ServicesLaunching the Mpls CLI Troubleshooting Services Windows Verify Routing Protocols 17-6 Verify Routing Tables 17-7 Verify CEF Switching 17-8 Verify CEF Switching Summary 17-9 Verify Mpls Interfaces 17-10 Verify Label Distribution 17-11 Verify Label Bindings 17-12 Verify Interface CEF Switching 17-13 17-14 18-1 Cisco 12000/10720 Router Manager AlarmsColor Severity of Alarms 18-2 Viewing AlarmsCisco 12000/10720 Router Trap Support Chassis Alarms 18-3 18-4 18-5 Interface AlarmsSyslog Traps 18-6 Configuration Management TrapsTrap Alarm Description Heartbeat Polling Connectivity ManagementOperational Status Polling Disabling Heartbeat Polling Performance Logging 18-8 Change Management 19-1 19-2 Inserting a Line CardMismatched State 19-3 Line Card in Mismatched State Removing a Line Card 19-4 19-5 19-6 Performance Management and Historical Data 20-1 20-2 Viewing the Performance Manager WindowMonitored Attribute Description Performance Manager window appears see Figure 20-3 Viewing Performance Statistics 20-4 20-5 Viewing a ChartPress Action Printing a Performance File Saving Performance Data to a FileArchiving 20-6 Exporting a Performance File Performance Manager Window-Detailed DescriptionMonitored Attributes 20-7 Time Period SummaryStart End Line Chart Tab RefreshTable Display Tab 20-9 20-10 Administration AdministrationConfiguration What Version is the Software? What Dialogs Use the IOS CLI Instead of SNMP? 21-2 21-3 ConfigurationVerifying SNMP, Log, and Trap Settings Show running-config begin snmp 21-4 BGP Configuration ATM Sub-Interface ConfigurationATM IP Configuration GUI Display Error Settings 21-5 Viewing ATM Physical Port Configurations? 21-6 SONET/SDH Conversion Chart OL-4455-01 GUIs that Synchronize with the Device when Launched GUI Synchronization Details GUIs that do not Synchronize with the Device when Launched Network Diagram Setup Problem Analysis of Problem Solution Local Outgoing Prefix Bytes Tag Next Hop Running Configs Tag Tag or VC Or Tunnel Id Switched Interface PE1 No ip mroute-cache Interface POS4/0/0 Bandwidth Network 0.0.0.0 255.255.255.255 area Router bgp Interface GigabitEthernet1/0 Pvc test5 254/5 Pvc test6 254/6 Pvc test4 254/10 PE2 CE2 Redundancy No keepalive-enable Enable password atlantech OL-4455-01 APS IN-1 Clli IN-2 IN-3 IN-4 IN-5 IN-6