Chapter 11 Layer 3 QoS
Access List Configuration
Figure 11-2 Access List Configuration—General Tab
Step 2 Choose Create Access List. A popup window appears asking you to enter a name for the access list.
Step 3 Enter a name for the access list you are about to create, then choose Ok.
A window appears, confirming if the access list creation was successful or not. The name of your new access list appears in the list box at the left of the window.
Step 4 In the General tab, choose the type of access list you want to create. You can also enable logging level at this time (see Access List Configuration
Step 5 Modify the configuration fields in the respective tab, as desired (for a detailed description of the fields within this window, see below).
Step 6 Choose Save to save the changes.
Step 7 To apply an access list to a CAR policy, see “Applying an Access List to a CAR Policy” section on page
|
| Cisco 12000/10700 v3.1.1 Router Manager User Guide |
|
| |
|
|
| |||
|
|
|
|
| |
|
|
|
| ||
