Cisco Systems 12000/10700 V3.1.1 manual Trap Alarm Description Severity Clears, 17-1

C H A P T E R 17

MPLS Trap Management

This chapter describes MPLS traps that can be configured using the Cisco 12000/10720 Router Manager application using the MPLS Trap Configuration window.

The MPLS Trap Configuration window allows you to enable/disable MPLS related Traps on a managed Cisco 12000 Series Router or a 10720 Router. The MPLS based traps that can be configured through the Cisco 12000/10720 Router Manager application are as follows:

•LDP traps

•VPN traps

•Traffic engineering traps

Cisco 12000/10720 Router Manager is capable of receiving the above-mentioned traps and address as alarms with a predefined severity against the respective chassis objects.

This chapter provides the following information:

•MPLS Traps Supported by the C12000/10720 Router Manager

•Enabling/Disabling Traps on the Device

•MPLS CLI Troubleshooting Services

MPLS Traps Supported by the C12000/10720 Router Manager

Table 17-1provides a lists of MPLS traps with the detailed description, severity and Clear correlation information:

Table 17-1 MPLS Traps/Alarms Raised

Trap	Alarm Description	Severity	Clears
LdpSessionUp	LDP Session Up between	Normal	LdpSessionUp and
	<LdpEntityLdpId> <LdpEntityIndex>		LdpSessionDown
	<LdpPeerLdpId>
LdpSessionDown	LDP Session Down between	Major	LdpSessionDown
	<LdpEntityLdpId> <LdpEntityIndex>
	<LdpPeerLdpId>

Cisco 12000/10700 v3.1.1 Router Manager User Guide

OL-4455-01 17-1