Cisco Systems 12000/10700 V3.1.1 manual Editing an Existing ATM Interface Profile

Chapter 7 Interface Profiles

Creating an ATM Interface Profile

Editing an Existing ATM Interface Profile

To edit an existing ATM Interface profile, proceed as follows:

Step 1 Choose the Cisco 12000/10720 Manager>Configuration>ATM>Configuration Profile option from an ATM interface object. See Table 7-2 on page 7-2for information on which objects allow you to launch the ATM Interface Configuration Profile window.

Step 2 Choose the profile you wish to edit from the list of existing profiles displayed in the ATM Interface list at the left of the window (see Figure 7-2).

Step 3 Edit the parameters displayed in the Configuration (1) tab, as required.

Step 4 Choose File > Save to save the changes made to the service profile.

Step 5 Choose File > Close to close the window.

Deleting an Existing ATM Interface Profile

To delete an existing ATM Interface profile, proceed as follows:

Step 1 Choose the Cisco 12000/10720 Manager>Configuration>ATM>Configuration Profile option from an ATM interface object. See Table 7-2 on page 7-2for information on which objects allow you to launch the ATM Interface Configuration Profile window.

Step 2 Choose the Edit > Delete Profile. Choose the profile you wish to delete from the list displayed. A Deletion Prompt window appears (see Figure 7-4) for you to confirm that you wish to delete the selected profile.

Figure 7-4 Deletion Prompt Window

Step 3 Click Yes to delete the selected profile or click No to close the window without deleting the profile.

When a profile is deleted it disappears from the list of existing profiles displayed in the ATM Profile list at the left of the window.

Cisco 12000/10700 v3.1.1 Router Manager User Guide

7-6 OL-4455-01