Cisco Systems 12000/10700 V3.1.1 manual Module Fault Management

Chapter 5 Managing Modules

Module Fault Management

Module Configuration Window—Detailed Description

The Module Configuration window displays a single Configuration tab.

Configuration Tab

The Configuration tab (see Figure 5-1 on page 5-4) displays three areas: Additional Descriptions Actions, and Commission Status.

Additional Descriptions

The Descriptions 1 and Descriptions 2 fields (optional) allow you to specify additional description information for the selected module (if required).

Actions

The Actions area contains two buttons:

Commission—Commissions the selected module.

Decommission—Decommissions the selected module.

Commission Status

The Commission Status area displays the status of the last commission performed on the selected module. Possible values are Succeeded or Failed.

Module Fault Management

The Module Fault Management window is a read-only window and provides fault information for a selected module. You do not need to enter any information into any of the fields. This section provides the following information:

•Viewing the Module Fault Management Window

•Module Fault Management Window—Detailed Description

Viewing the Module Fault Management Window

To view the Module Fault Management window, proceed as follows:

Step 1 Right click on a module and select the Cisco 12000/10720 Manager>Fault>Module Fault Management option. See Table 5-2 on page 5-2for information on which objects allow you to launch the Module Fault Management window. The Module Fault Management window appears, with the Fault Management tab displayed.

Cisco 12000/10700 v3.1.1 Router Manager User Guide

OL-4455-01 5-7