14-17 | Cisco Systems 12000/10700 V3.1.1 specification

Chapter 14 Routing

BGP Configuration

Figure 14-10 BGP Redistribute Configuration Window

Step 4 Edit the fields displayed in the window, as required.

BGP Redistribute Configuration—Detailed Description

The BGP Redistribute Configuration window displays the following:

Local AS—The Autonomous System number in the router.

Protocol—Specifies the protocol to be redistributed into BGP. Valid Protocol Names that can be redistributed are connected, static, ospf, isis, igrp, eigrp, egp, rip, mobile, odr, dvmrp.

Source ID—Indicates the Process ID of the redistributed protocol. A Positive Integer will indicate the process id of the redistributed protocol; a character string will indicate the ISO routing area tag. In case of protocols like CONNECTED and STATIC this attribute cannot be configured.

IS-IS Routing Level—Specifies the routing level of ISIS Protocol. The values for this field are: level-1, level-2 or level-1-2 when protocol is IS-IS.

Redistribution Metric—Specifies the metric used for redistributed routes.

Action

Add Redistribute Entry—Clicking on the Add Redistribute action button adds the redistribution entry to the device.

Remove Redistribute Entry—Clicking on the Remove Redistribute Entry action button removes the redistribution entry from the device.

	Cisco 12000/10700 v3.1.1 Router Manager User Guide
	Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01		14-17
OL-4455-01		14-17

Page 407

Image 407

Cisco Systems 12000/10700 V3.1.1 manual BGP Redistribute Configuration-Detailed Description, 14-17

Contents

Corporate Headquarters Cisco 12000/10700 v3.1.1 Router Manager User Guide Cisco 12000/10700 v3.1.1 Router Manager User Guide Iii N T E N T S Views Object States Chassis Fault Management Window-Detailed Description Vii RPR Status Viewing the RPR Status Window Viii Module Performance Window-Detailed Description Interface Configuration SRP Interface Side Configuration Sonet Interface Status Xii Virtual Tributary Tab Xiii CAR Policy Configuration Deleting an Existing ToFab policy Xiv OAM tab Xvi Configuration Tab Xvii BGP-Details14-21 Xviii Redistribute Information Xix Mpls Interface Status Interface VRF Status Xxi Mpls Trap Management Xxii Archiving Xxiii Running Configs C-4 CE1 C-4 PE1 C-5 PE2 C-11 CE2 C-12 Xxiv Xxv Document Audience Xxvi Chapter Number Chapter Title ContentDocument Organization Xxvii Managing VLANs Format Description Example Command ConventionsConventions Example Conventions Xxix Obtaining DocumentationDocument Conventions Cisco.com Xxx Documentation CD-ROMOrdering Documentation Documentation Feedback Xxxi Obtaining Technical AssistanceTechnical Assistance Center Xxxii Obtaining Additional Publications and InformationCisco TAC Website Cisco TAC Escalation Center Xxxiii Xxxiv A P T E R Overview Cisco Element Manager Framework Cisco EMF Software Cisco 12000/10720 Router Manager Software Overview Accessing Online Help Concepts See Physical Interfaces and Technologies section on Physical Objects Cisco 12000/10720 Router Chassis Cisco 12016 Chassis Physical Interfaces and Technologies Supporting ModulesLinecards POS Logical Objects Logical Object Management Functions You Can Perform Use of Telecom Graphics ObjectsLogical Object Management Functions Sample Telecom Graphical Object Sample Cisco 12000 Chassis Showing Telecom Graphical Objects OSI Mappings Component Managed View Views Vlan View Layer 3 QoS ViewNetwork View Physical View Cisco 12000/10720 Router Manager Object States Cisco 12000/10720 Router Manager Object States Performance Logging On ErroredDecommissioned State Normal State Transient Object States Lost CommsDiscovery Lost Comms Mismatched OL-4455-01 Cisco 12000/10720 Router Manager Workflow Getting Started ATM Starting a Cisco EMF User Session Starting Cisco EMF and Cisco 12000/10720 Router Manager Login window see -2 appears Launching an Application Launchpad Event Browser Events AccessMap Viewer Viewer Groups Event Groups Notification ProfilesThresholding Regimes PreFilter DeploymentQuitting a Cisco EMF User Session Deployment Process Outline Deployment Process Workflow Manually Deploying a Generic Site Object Choose DeploymentDeploy Generic Objects Deployment Wizard Templates Window Deployment Wizard Object Parameters Window 1 Deployment Wizard Object Parameters Window 2 Deployment Wizard Views window appears Object Selector Window appears 11 Deployment Wizard-Views Window 12 Deployment Wizard-Summary Window IP Auto Discovery of the Cisco Chassis 14 Example of Auto Discovery Manually Deploying a Cisco 12000/10720 Chassis 15 Deployment Wizard-Object Parameters 1 16 Deployment Wizard-Object Parameters Window 3 Click on Select. The Object Selector window appears 18 Object Selector Window 20 Deployment Wizard Summary 21 Before Subchassis Discovery Commissioning and Subchassis Discovery Commissioning a Chassis 22 Chassis Configuration Window 23 After Subchassis Discovery Object States Manually Deploying ModulesDecommissioning a Chassis Manually Deploying a GRP Card User Named vs. Auto Named Module Deployment 24 Deployment Wizard-Templates 25 Deployment Wizard-Object Parameters Click Select. The Object Selector window appears 27 Object Selector Window 28 Deployment Wizard-Views 29 Deployment Wizard-Summary Card Type Menu Option Card Description Manually Deploying Line CardsLine Cards Supported by Cisco 12000 Series Routers SR-SC LR-SC Ethernet Line Cards Supported by Cisco 12000 Series Routers Menu Option Card Description Cisco 12000/10720 Router Manager POS LR2 Line Cards Supported by Cisco 10720 Routers 30 Deployment Wizard-Templates 31 Deployment Wizard-Object Parameters 32 Deployment Wizard-Views 33 Object Selector Window 34 Deployment Wizard-Views Deployment Wizard-Summary window appears Card Card Type Card Description Manually Deploying Supporting ModulesDeploying a Clock Scheduler Card 36 Deployment Wizard-Views 37 Object Selector Window 38 Deployment Wizard-Views 39 Deployment Wizard-Summary 40 Deployment Wizard-Views Deploying a Switch Fabric Card 41 Object Selector Window 42 Deployment Wizard-Views 43 Deployment Wizard-Summary Pre-deployment Performing Pre-deployment OL-4455-01 Managing Chassis Manager Window/Task Launching the Chassis Management WindowsMenu Options to Select to Open Window Viewing the Management Information Window Management Information Management Information Window-Configuration Tab System Configuration Choose the IOS/Command Line Security tab Entering or Changing IOS CLI Username and Passwords IOS Username and Passwords Configuration TabIOS/Command Line Security Tab System Configuration Viewing the Chassis Configuration Window Chassis Configuration Decommissioning a Chassis Commissioning a Chassis Action Report Window Starting Global Performance Logging Stopping Global Performance Logging Choose the Additional Descriptions tab Entering Additional Descriptions for a Selected Chassis Choose the Device Management tab Device Management Tab in Configuration Window Chassis Configuration Window-Detailed Description Commission Status Snmp ManagementAdditional Descriptions Tab Device Management Tab Modifying Snmp Community Names or Version Viewing the Snmp Management Window Community Names Enabling or Disabling Trap GenerationSnmp Management Window-Detailed Description Trap Generation Chassis InventoryViewing the Chassis Inventory Window Version General Tab Chassis Inventory Window-Detailed Description Asset Tracking Tab Viewing the Chassis Fault Management Window Chassis Fault Management 10 Chassis Fault Management Window-General Tab 11 Chassis Fault Management Window-Power Supply Tab 12 Chassis Fault Management Window-Temperature Tab Changing Column Width 13 Chassis Fault Management Window-Fan Tab LED Status Chassis Fault Management Window-Detailed DescriptionPower Supply Tab Chassis Availability Voltage Temperature TabTemperature Fan Tab Viewing the Command Log Window Command Log Command Log Details Table Command Log Window-Detailed DescriptionCommand Log Details Tab Event History Details System LogViewing the SysLog Messages Window SysLog Message Tab System Log Window-Detailed Description Sys Log Message Details Using RME for Chassis Management TasksSysLog Messages Area Viewing the APS Status Window Configuration Backup/Restore Using RMEIOS Image Download Using RME APS Status 16 APS Status Window APS Circuits Area Initiating a Telnet ServiceAPS Status Window-Detailed Description Launching the Web Console Configuration EditorViewing the Configuration Editor Window 18 Configuration Editor Window Selection Configuration Editor Window-Detailed DescriptionSearching in the Configuration Editor Configuration Editor Tab Operations Done Locally RPR ConfigurationViewing the RPR Configuration Window Operations on Device 19 RPR Configuration Window RPR Configuration Window-Detailed Description Viewing the RPR Status Window Switch Over TabRPR Status RP Status RPR Status Window-Detailed Description LC Status IP Routing StatusViewing the IP Routing Status window Cidr Info IP Routing Status Window-Detailed DescriptionClassless Inter-Domain Routing Tab TCP Status 22 TCP Status Window Viewing the TCP Status Window TCP Status TCP Status Window-Detailed DescriptionTCP Status Tab Connections Table TCP Connections Tab Viewing the UDP Status Window UDP Status Status UDP Status Window-Detailed Description UDP Port Information Module Abbreviation Cisco 12000/10720 Router Manager Module Names Cisco 12000/10720 Router Launching the Module Management Windows Viewing the Configuration Window Module Configuration Commissioning a Selected Module Configuration Window Decommissioning a Selected Module To decommission a module, proceed as follows Viewing the Module Fault Management Window Module Fault ManagementModule Configuration Window-Detailed Description Module Availability Module Fault Management Window-Detailed Description Cisco Contact Details Module Performance Starting or Stopping Performance Logging Viewing the Module Performance Window Performance Logging Module Performance Window-Detailed DescriptionCPU Usage Viewing the Module Inventory Window Module Inventory Module Details Module Inventory Window-Detailed DescriptionGeneral Slot & Ports Asset Tracking Managing Interfaces Interface Interface Profiles Launching the Interface Profile Windows Interface Profile Types Creating an ATM Interface Profile Not applicable for Cisco 12000/10720 Router Manager Prompt Window Deleting an Existing ATM Interface Profile Editing an Existing ATM Interface Profile ATM Configuration Configuration 1 Tab Physical Layer Configuration 2 TabIlmi Configuration Information Element Layer Hsrp Profile Window Creating an Hsrp Profile Editing an Existing Hsrp Interface Profile Hsrp Profile Parameters Area Deleting an Existing Hsrp Interface ProfileHsrp Profile Window-Detailed Description Actions Creating a POS Interface Profile POS Profile Dialog -POS Config Tab Editing an Existing POS Interface Profile General POS Config TabDeleting an Existing POS Interface Profile POS Profile Window-Detailed Description Sonet Overhead Alarm Reporting & ThresholdAlarm Reporting 11 SRP Side Profile Window Creating a SRP Side Profile 12 SRP Side Profile Window-Alarms tab Deleting an Existing SRP Side Profile Editing an Existing SRP Side Profile 14 Deletion Prompt Window SRP Side Profile Window-Detailed Description Reporting and Threshold Alarms TabCreate Profile Reporting Interfaces and Related Technology-Specific Windows Interface Configuration Interfaces Launching the Interface Configuration Windows Generic Interface Configuration Configuring and Commissioning a Generic Interface Viewing the Generic Interface Configuration Window Decommissioning an Interface Generic Interface Configuration Window-Detailed DescriptionConfigurable Parameters Viewing the ATM Interface Configuration Window ATM Interface Configuration ATM Interface Configuration Window-Configuration 1 Tab Configuring an ATM Interface ATM Interface Configuration Window-Detailed Description Ethernet Interface Configuration Ethernet Interface Configuration Window-Configuration Tab Viewing the Ethernet Interface Configuration Window Ethernet Interface Configuration Window-HSRP Parameters Tab Configuring an Ethernet Interface Hsrp Parameters Tab Ethernet Interface Configuration Window-Detailed Description Hsrp Parameters IP Configuration Configuring an IP Interface Viewing the IP Configuration Window Generic Parameters Tab POS Interface ConfigurationIP Configuration Window-Detailed Description Viewing the POS Interface Configuration Window POS Interface Configuration Window-POS Config Tab Configuring a POS Interface BER TCA POS Interface Configuration Window-Detailed Description APS Interface Configuration APS Configuration Window-APS Tab Viewing the APS Configuration Window Removing a Protected Interface Adding a Working InterfaceRemoving a Working Interface Adding a Protected Interface APS Interface APS Configuration Window-Detailed DescriptionAPS Tab Viewing the SRP Interface Configuration Attributes SRP Interface Configuration SRP Interface Configuration Window-Detailed Description Configuring a SRP Interface Viewing the SRP Interface Side Configuration Attributes SRP Interface Side Configuration 10 SRP Side Configuration window-Alarms tab Configuring a SRP Side SRP Interface Side Configuration Window-Detailed Description Alarms Tab OL-4455-01 Interface Type Interface Status Launching the Interface Status Windows Viewing the Generic Interface Status Window Generic Interface Status Transmission Details Generic Interface Status Window-Detailed DescriptionInterface Details Last Change Details Viewing the ATM Interface Status Window ATM Interface Status ATM Transmit Status ATM Interface Status Window-Detailed Description Action ATM Receive StatusPhysical Layer Status ATM Port Status Viewing the ATM Interface Faults Window ATM Interface Faults Viewing the DS3/E3 Interface Status Window ATM Interface Faults Window-Detailed DescriptionFault Tab DS3/E3 Interface Status Status Tab DS3/E3 Interface Status Window-Detailed Description Far End DS3/E3 Status DS3/E3 Status Viewing the Sonet Interface Status Window Sonet Interface Status Sonet Interface Status-Section Tab Choose the Line tab, if required see Figure Choose the Path tab, if required see Figure Line Sonet Status Window-Detailed DescriptionMedium Section Virtual Tributary SRP Interface StatusViewing the SRP Interface Status Attributes Side B Frame SRP Interface Status Window-Detailed DescriptionInterface Tab Side a Frame Viewing the IPS Status Attributes SRP Side IPS Status IPS Status SRP Topology MapIPS Status Window-Detailed Description Viewing the SRP Topology Map Topology Map SRP Topology Map-Detailed Description OL-4455-01 10-1 Interface Performance 10-2 Launching the Interface Performance Windows 10-3 Generic Interface PerformanceViewing the Generic Interface Performance Window Interface Performance Window-Performance 2 Tab 10-4 10-5 Starting Performance Logging for a Selected Interface Start Performance Logging Confirmation Window 10-6 10-7 Stopping Performance Logging for a Selected Interface Packets/Octets Statistics Generic Interface Performance Window-Detailed DescriptionPerformance 1 Tab General Information 10-9 Error StatisticsPerformance 2 Tab Performance Logging Packets/Octets Statistics High Capacity Sonet Interface PerformanceViewing the Sonet Interface Performance Window Performance 3 Tab Sonet Interface Performance-Section Tab 10-11 Sonet Interface Performance-Line Tab 10-12 10 Sonet Interface Performance-Path Tab 10-13 Line Sonet Performance Window-Detailed DescriptionSection Tab Line Tab Virtual Tributary Tab DS3/E3 Interface PerformanceViewing the DS3/E3 Interface Performance Window Path Tab 11 DS3/E3 Interface Performance Window-DS3 Performance Tab 10-16 10-17 DS3/E3 Interface Performance Window-Detailed DescriptionDS3 Performance Tab E3 Performance Tab 10-19 Ethernet Interface PerformanceViewing the Ethernet Interface Performance Window 10-20 Ethernet Interface Performance Window-Detailed DescriptionGeneral Statistics Collision Statistics 10-21 SRP PerformanceViewing the SRP Performance Window 15 SRP Performance window-Outer Ring tab 10-22 16 SRP Performance Window-Inner Ring Tab 10-23 10-24 SRP Performance Window-Detailed Description 10-25 Counters for last x secondsUtilization Data Traffic 10-26 Outer Ring Tab 10-27 Inner Ring Tab Side B Data Traffic Bytes SRP Side PerformanceSide Tab Side a Data Traffic Bytes 10-29 Viewing the SRP Side Performance Window 19 SRP Side Performance window-Host tab 10-30 Packets Out SRP Side Performance Window-Detailed DescriptionRing Tab Packets 10-32 Host TabOctets Out 10-33 Errors TabRing Host 10-34 11-1 Launching the Layer 3 QoS Windows 11-2 Layer 3 QoSMenu Options to Launch CAR and Wred Overview Access ListsCommitted Access Rate CAR Weighted Random Early Detection Wred 11-4 Towards the Fabric ToFabMdrr Overview Mdrr in Cisco 12000/10720 Router Manager 11-5 Implications of Engine TypeCAR and Wred in Cisco 12000/10720 Router Manager 11-6 CAR Policy ConfigurationWorkflow for CAR Per Interface Rate Control Pirc Support 11-7 Limited Support for EngineCreating a CAR Policy 11-8 Applying an Access List to a CAR Policy CAR Parameters CAR Policy Configuration Window-Detailed DescriptionCAR Policy Configuration Tab Access List Choice 11-10 Access List ConfigurationCreating Access Lists Exceed Action 11-11 Access List Configuration-General Tab 11-12 Access List Configuration Window-Detailed Description 11-13 IP Standard TabIP Standard 11-14 IP Precedence TabIP Precedence 11-15 MAC 11-16 IP Extended TabIP Extended Valid Protocol Names 11-17 Dynamic ListSource and Destination Port 11-18 CAR Policy ApplyApplying a CAR Policy to an Interface 11-19 Removing a CAR Policy from an InterfaceEditing or Deleting a CAR Policy 11-20 CAR Policy Apply Window-Detailed DescriptionCAR Policy Apply Tab 11-21 CAR Policy StatusViewing the CAR Policy Status Window Apply Status 11-22 Workflow for WRED/DRREngine Type Support for Wred 11-23 CoS Queue Group ConfigurationCreating a CoS Queue Group Under Wred 11-24 Editing an Existing CoS Queue GroupDeleting an Existing CoS Queue Group 11-25 CoS Queue Group Configuration Window-Detailed DescriptionCoS Queue Group Tab 11-26 Wred Parameters 11-27 DRR TabDRR Mapping DRR Queue 11-28 Wred Tx ConfigurationApplying a CoS Queue Group to an Interface 11-29 13 Wred Tx Configuration Window 11-30 Removing a CoS Queue Group from an InterfaceChanging the Association of a CoS Queue Group Associated COS Queue Group Info Wred Tx Configuration Window-Detailed DescriptionTx Config Tab Available COS Queue Group 11-32 Wred ToFab ConfigurationCreating a ToFab Policy 11-33 Editing an Existing ToFab policy 11-34 Deleting an Existing ToFab policy Slot-CosQ Groups Wred ToFab Policy Configuration Window-Detailed DescriptionToFab Policy Configuration tab Slot Table Parameters 11-36 Wred Rx ConfigurationAssociating a ToFab Policy to a Line card 11-37 Disassociating a ToFab Policy from a Line cardChanging the Association of a ToFab Policy Apply Status Wred Rx Configuration Window-Detailed DescriptionRx Configuration Tab Associated slot-Table Info 12-1 Managing ATM Connections 12-2 PVC ConnectionsTerminating PVC Connections 12-3 SVC Connections 12-4 Launching the ATM Connections WindowsATM Connection Synchronization 12-5 DeviceisMaster default policyPolicy Name Value VCL in Cisco EMF VCL State VCL on Device Behavior 12-6 Normal PolicyCEMFisMasterAfterFirstSync 12-7 Creating ATM ConnectionsUploading Existing ATM Connections and QoS Profiles 12-8 Configuring the Management Password InformationWithout configuring the Management Password Information Naming Convention for the Uploaded Connection Objects 12-9 Viewing the ATM Connection Upload Window 12-10 Uploading Existing ATM Connections and ATM QoS Profiles 12-11 ATM Connection Upload Window-Detailed DescriptionConnection Upload Tab Upload 12-12 Managing ATM QoS ProfilesCreating ATM QoS Profiles 12-13 ATM QoS Profiles Configuration Window-Profile Tab 12-14 Editing an ATM QoS Profile 12-15 Deleting an ATM QoS Profile 10 Deployment Wizard-Summary Window 12-16 Category ATM QoS Profiles Configuration Window-Detailed DescriptionProfile Tab RxTx Parameters Tab Type to be Deploying ATM Connection ObjectsDeploying a PVC Object Object 12 Deployment Wizard-Templates 12-19 14 Deployment Wizard-Object Parameters 12-20 15 Object Selector Window 12-21 12-22 Deploying an SVC Object 18 Deployment Wizard-Object Parameters 12-23 19 Deployment Wizard-Object Parameters 12-24 20 Deployment Wizard-Views 12-25 21 Deployment Wizard-Object Selector 12-26 22 Deployment Wizard-Object Parameters 12-27 12-28 Applying an ATM QoS Profile to an ATM Connection 24 ATM QoS Profiles Management-Profile Tab 12-29 12-30 ATM PVC ConfigurationViewing the ATM VCL Configuration Window 12-31 Connecting or Disconnecting a PVC 12-32 Decommissioning or Re-Commissioning a PVCATM OAM Ping 12-33 27 ATM VCL Configuration-OAM Ping tab 12-34 ATM VCL Configuration Window-Detailed DescriptionTraffic Information Encapsulation Parameters Interface Layer 3 Configuration TabVCL Config OAM Information OAM Ping Parameters OAM Ping TabSubscriber OAM Parameters 12-37 SVC ConfigurationViewing the SVC Configuration Window Decommissioning or Recommissioning an SVC Connecting or Disconnecting an SVCSVC Configuration Window-Detailed Description Configuration 12-39 SVC ParametersVC Parameters 12-40 PVC Status 12-41 ATM VCL Status Window-Detailed DescriptionPVC Status Soft PVC Details Auto Detect Statistics CharacteristicsOAM tab OAM Details 13-1 Launching the Vlan Windows 13-2 Vlan Synchronization Vlan Synchronize Window 13-3 13-4 Deploying Vlan objectsDeploying a Domain Deploying a Vlan object 13-5 Deployment Wizard-Object Parameters Window 13-6 13-7 10 Deployment Wizard-Templates Window 13-8 11 Deployment Wizard-Object Parameters Window 13-9 13-10 14 Deployment Wizard-Views 13-11 13-12 16 Deployment Wizard-Views 13-13 13-14 Vlan ConfigurationViewing the Vlan Configuration Window 13-15 Commissioning a Vlan 13-16 Decommissioning a Vlan 13-17 Start Performance Logging 13-18 Stop Performance Logging 13-19 Vlan Configuration Window-Detailed DescriptionVlan Performance Status 13-20 Viewing the Vlan Performance Window 13-21 Reparenting VLANs and Vlan Sub-InterfacesVlan Performance Window-Detailed Description 13-22 Deleting Vlan Objects 26 Deployment Wizard-Summary 13-23 13-24 14-1 Launching the Routing Windows 14-2 BGP Management 14-3 BGP ConfigurationViewing the BGP Details Tab on the BGP Configuration Window 14-4 BGP Details Tab-Detailed DescriptionBGP General 14-5 Enabling BGP on a ChassisBGP Information 14-6 Enable BGP Window-Detailed Description 14-7 Modifying BGP on a Chassis 14-8 BGP Modify Window-Detailed DescriptionDisabling BGP on a Chassis 14-9 Viewing the Network Tab on the BGP Configuration Window 14-10 Network Tab-Detailed DescriptionBGP Network Information 14-11 BGP Network ConfigurationBGP Network Configuration Window-Detailed Description 14-12 Viewing the Neighbor Tab on the BGP Configuration Window 14-13 BGP Neighbor ConfigurationNeighbor Tab-Detailed Description BGP Neighbor Information 14-14 BGP Neighbor Configuration Window-Detailed Description 14-15 BGP Configuration Window-Redistribution Tab 14-16 BGP Redistribute ConfigurationRedistribution Tab-Detailed Description BGP Redistribution Information 14-17 BGP Redistribute Configuration-Detailed Description 14-18 BGP StatusViewing the BGP Status Window 12 BGP Status-Network Tab 14-19 13 BGP Status-Neighbor Tab 14-20 BGP Information BGP Status Window-Detailed DescriptionBGP-Details BGP General BGP Neighbor Information NetworkNeighbor BGP Network Information 14-23 BGP Address-Family SynchronizationRedistribution BGP Redistribution Information 15 BGP Address-Family Synchronization Window 14-24 16 Action Report 14-25 14-26 BGP Address Family ConfigurationBGP Address-Family Synchronization-Detailed Description Synchronization Tab 14-27 18 BGP Address-Family Configuration Window 14-28 Configuring Address FamilyAF-General Tab-Detailed Description BGP Address Family Information 14-29 Configure Address Family-Detailed DescriptionAdd Address Family 14-30 Modifying BGP Address Family 14-31 Modify Address Family Parameters 14-32 21 BGP Address-Family Configuration Window-AF-Network Tab 14-33 BGP Address Family-Network ConfigurationAF-Network Tab-Detailed Description Network Information 14-34 Add/Remove Network 14-35 23 BGP Address-Family Configuration Window-AF-Neighbor Tab 14-36 BGP Address Family-Neighbor ConfigurationAF-Neighbor Tab-Detailed Description Neighbor Information 14-37 Add/Remove Neighbor 14-38 14-39 AF-Redistribute Tab-Detailed DescriptionRedistribute Information 14-40 BGP Address Family-Redistribute Configuration 14-41 BGP Address-Family StatusViewing the BGP Address-Family Status window Add/Remove Redistribution Information 27 BGP Address-Family Status Window 14-42 28 BGP Status-AF-Network Tab 14-43 29 BGP Status-AF-Neighbor Tab 14-44 14-45 BGP Address-Family Status Window-Detailed DescriptionAF-General BGP Address Family Information AF-Redistribute AF-NetworkAF-Neighbor 14-47 Ospf ConfigurationViewing the Ospf Configuration Window Ospf Management 14-48 Config Tab-Detailed DescriptionConfig 14-49 Adding an Ospf Process 14-50 Removing an Ospf Process 14-51 Viewing the Network Tab on the Ospf Configuration WindowOspf Network 14-52 Configuring a Network 37 Action Report 14-53 Viewing the Ospf Status Window Configure Network-Detailed DescriptionConfigure Network Ospf Status 39 Ospf Status Window 14-55 40 Ospf Status-Process Information Tab 14-56 41 Ospf Status-Area Tab 14-57 42 Ospf Status-Interface Tab 14-58 43 Ospf Status-Neighbor Tab 14-59 44 Ospf Status-Link State Tab 14-60 14-61 Ospf Status-Detailed DescriptionGeneral Group Network Details Process InformationArea Process Summary 14-63 InterfaceStub Area Area Range 14-64 Interface MetricVirtual Interface 14-65 NeighborVirtual Neighbor Hosts Link StateHost Lsdb 15-1 Introduction 15-2 Mpls Management Workflow 15-3 Launching the Mpls Management WindowsWindow/Task Menu Options to Select to Open Window 15-4 Mpls Forwarding InformationViewing the Mpls Forwarding Information Window 15-5 Mpls Forwarding Information Window-Detailed DescriptionMpls Forwarding Information Tab 15-6 Fault Management for Mpls LSR InterfacesMpls Interface Status Viewing the Mpls Interface Status Window 15-7 Interface Configuration TabMpls Interface Status Window-Detailed Description General 15-8 Mpls Interface InformationViewing the Mpls Interface Information Window 15-9 Interface Setup TabMpls Interface Information Window-Detailed Description Select Interface 15-10 Mpls Setup Tab 15-11 Interface Performance Tab 15-12 Mpls Performance Tab Mpls Interface Information Window-MPLS Performance Tab 15-13 15-14 Performance Management for Mpls LSR InterfacesMpls Interface Performance Viewing the Mpls Interface Performance Window 15-15 Mpls Interface Performance Window-Detailed DescriptionGeneral Performance Statistics Tab Counters 15-16 Mpls Performance Statistics TabHigh Speed Counters 15-17 Incoming DirectionOutgoing Direction 15-18 Fault Management for Mpls LDPMpls LDP Entity Status Window Viewing the Mpls LDP Entity Status Window 15-19 Mpls LDP Entity Status Window-Detailed DescriptionEntity Tab 15-20 General LDP Status 15-21 Entity Statistics TabEntity Statistics 15-22 General Label Range Tab 15-23 General Label Range 15-24 ATM Parameters TabATM Parameters 15-25 ATM Label Range TabATM Label Range 15-26 Mpls LDP Hello AdjacenciesViewing the Mpls LDP Hello Adjacencies Window 15-27 Mpls LDP Hello Adjacencies Window-Detailed DescriptionHello Adjacencies Tab Hello Adjacencies 15-28 Mpls LDP Peer StatusViewing the Mpls LDP Peer Status Window LDP Peers Mpls LDP Peer Status Window-Detailed DescriptionPeers Tab Sessions Tab 15-30 LDP Sessions 15-31 Session Statistics TabLDP Session Statistics 15-32 ATM Sessions TabLDP ATM Session 15-33 Fault Management for Mpls Traffic EngineeringMpls Tunnel Information Viewing the Mpls Tunnel Information Window 15-34 Mpls Tunnel Information Window-Detailed DescriptionSelect Tunnel Tab 15-35 Head Tunnel Setup TabSelect Tunnel 15-36 Tunnel Info 15-37 Tunnel StatusAdvanced 15-38 Head Tunnel Hops Tab 15-39 LSP Setup TabHop Table 15-40 22 Mpls Tunnel Information Window-LSP Setup Tab 15-41 15-42 LSP Hops Tab 15-43 Actual Route HOP TableComputed HOP Table 15-44 LSP Resource Tab 15-45 Performance TabResource Table Tunnel Performance 15-46 16-1 Introduction to VRF Management 16-2 VRF Management WorkflowsLaunching the Mpls VRF Management Windows Router Manager Window 16-3 Creating VRF Objects in the EMDeploying VRF Objects Deploying a VRF Object 16-4 Deployment Wizard Views 16-5 Object Selector Window 16-6 Deployment Wizard-Views 16-7 16-8 Creating and Configuring the VRF Policy on a DeviceConfiguring and Creating a VRF Policy on a Selected Chassis 16-9 VRF Configuration Window 16-10 Removing a VRF Policy from a Selected ChassisAdding a Routing Target to a Selected Chassis Deleting a Routing Target from a Selected Chassis VRF Configuration Tab VRF Configuration Window-Detailed Description Import Associating a VRF Policy with an InterfaceDevice Action Export 16-13 Associating VRF Policies Available VRF Policies Removing a VRF Policy from a Selected InterfaceVRF Association Window-Detailed Description VRF Tab 16-15 VRF Fault ManagementVRF Status Viewing the VRF Status Window 16-16 VRF Status Window-Detailed DescriptionVRF Details 16-17 Performance and Security Tab 16-18 PerformanceSecurity 16-19 Interface VRF StatusViewing the Interface VRF Status Window Viewing the VPN Status Window Interface VRF Status Window-Detailed DescriptionVPN Status Interface VRF Association Tab 16-21 VPN Status Window-Detailed Description 16-22 Routes TabVRF Routes 16-23 Route Targets Tab 16-24 VRF Route Targets 16-25 BGP Neighbor TabInterface MPLS/EBGP Neighbor 16-26 VRF Object StatusViewing the VRF Object Status Window 16-27 VRF Object Status Window-Detailed Description 16-28 Routes 16-29 16-30 Route Targets 16-31 Interface Association TabInterface Association 16-32 Performance Tab 17-1 Trap Alarm Description Severity Clears 17-2 17-3 Enabling/Disabling Traps on the Device 17-4 Mpls Trap Configuration Window-Detailed DescriptionTraps Tab 17-5 Mpls CLI Troubleshooting ServicesLaunching the Mpls CLI Troubleshooting Services Windows 17-6 Verify Routing Protocols 17-7 Verify Routing Tables 17-8 Verify CEF Switching 17-9 Verify CEF Switching Summary 17-10 Verify Mpls Interfaces 17-11 Verify Label Distribution 17-12 Verify Label Bindings 17-13 Verify Interface CEF Switching 17-14 18-1 Cisco 12000/10720 Router Manager AlarmsColor Severity of Alarms 18-2 Viewing AlarmsCisco 12000/10720 Router Trap Support 18-3 Chassis Alarms 18-4 18-5 Interface AlarmsSyslog Traps 18-6 Configuration Management TrapsTrap Alarm Description Disabling Heartbeat Polling Heartbeat PollingConnectivity Management Operational Status Polling 18-8 Performance Logging 19-1 Change Management 19-2 Inserting a Line CardMismatched State Line Card in Mismatched State 19-3 19-4 Removing a Line Card 19-5 19-6 20-1 Performance Management and Historical Data 20-2 Viewing the Performance Manager WindowMonitored Attribute Description 20-3 Performance Manager window appears see Figure 20-4 Viewing Performance Statistics 20-5 Viewing a ChartPress Action 20-6 Printing a Performance FileSaving Performance Data to a File Archiving 20-7 Exporting a Performance FilePerformance Manager Window-Detailed Description Monitored Attributes End Time PeriodSummary Start 20-9 Line Chart TabRefresh Table Display Tab 20-10 What Version is the Software? AdministrationAdministration Configuration 21-2 What Dialogs Use the IOS CLI Instead of SNMP? 21-3 ConfigurationVerifying SNMP, Log, and Trap Settings 21-4 Show running-config begin snmp 21-5 BGP ConfigurationATM Sub-Interface Configuration ATM IP Configuration GUI Display Error Settings 21-6 Viewing ATM Physical Port Configurations? SONET/SDH Conversion Chart OL-4455-01 GUI Synchronization Details GUIs that Synchronize with the Device when Launched GUIs that do not Synchronize with the Device when Launched Setup Network Diagram Analysis of Problem Problem Local Outgoing Prefix Bytes Tag Next Hop Solution Tag Tag or VC Or Tunnel Id Switched Interface Running Configs PE1 No ip mroute-cache Interface POS4/0/0 Bandwidth Network 0.0.0.0 255.255.255.255 area Router bgp Interface GigabitEthernet1/0 Pvc test5 254/5 Pvc test6 254/6 Pvc test4 254/10 PE2 CE2 Redundancy No keepalive-enable Enable password atlantech OL-4455-01 IN-1 APS IN-2 Clli IN-3 IN-4 IN-5 IN-6