Chapter 12 Managing ATM Connections
Uploading Existing ATM Connections and QoS Profiles
Naming Convention for the Uploaded Connection Objects
The ATM Connection Upload queries the device for the VPI and VCI values of the PVCs through the MIBs and simultaneously, it telnets to the device to query the names of the PVCs for creating the connection objects in the EM. Hence, if the management passwords are not configured in the EM, then the names for the connection objects cannot be retrieved by the EM.
The naming conventions that are followed for the connection objects during upload can be by,
•Configuring the Management password information, or
•Without configuring the Management password information.
Configuring the Management Password Information
When the Management password information is set, the naming convention followed for the PVCs is different. In this scenario, if any PVC is created in the device, it is represented in the EM in accordance with the value set in the management information window. For example, for a named PVC, ciscoPVC1 and for an unnamed PVC, it would be displayed as
Without configuring the Management Password Information
When an ATM Connection upload is initiated, all the connections in the device are uploaded to the EM and the PVCs would be named as VCL_interface_vpi.vci (ex:
Note All the PVCs are represented by this convention in the EM.
Figure 12-3 Example of PVC Naming conventions
The Uploading PVCs and ATM QoS Profiles section covers the following areas:
Cisco 12000/10700 v3.1.1 Router Manager User Guide
|
|
|
|
