Cisco Systems 12000/10700 V3.1.1 manual IP Standard Tab, 11-13

Note

Chapter 11 Layer 3 QoS

Access List Configuration

IP Standard Tab

The IP Standard tab displays a single IP Standard area:

Figure 11-3 Access List Configuration—IP Standard Tab

IP Standard

The IP Standard area displays five fields:

Access Action—Action to be taken if the conditions are matched. This value will be either deny or permit.

Host Type—Host type indicates the hosts for which the access action are available. Possible values for this field include the following:

•Any—All hosts

•Host Name—Specified host name with wild card bits

•A.B.C.D—Specified IP address with wild card bits

•Host Hostname—Only the specified hostname

•Host A.B.C.D—Only the specified IP address

Values are grayed out in the IP Standard area depending upon the Host Type selected.

Host Name—Name of the host (or source of the packet) for which the access action is applicable.

	Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01		11-13