Cisco Systems 12000/10700 V3.1.1 manual Cisco 12000/10720 Router Manager Module Names

C H A P T E R 5

Managing Modules

This chapter describes the management tasks that can be performed on the modules in the

Cisco 12000/10720 Router being managed using the Cisco 12000/10720 Router Manager application.

The following modules can be managed using the Cisco 12000/10720 Router Manager:

•GRPs

•Line cards—ATM, Ethernet, SRP, POS, DS-3, Fast Ethernet, and Gigabit Ethernet

•Supporting modules—CSCs, SFCs, AC or DC power supply modules, fan tray modules, blower modules, alarm modules and bus board

This chapter contains the following sections:

•Cisco 12000/10720 Router Manager Module Names

•Launching the Module Management Windows

•Module Configuration

•Module Fault Management

•Module Performance (only available on GRPs)

•Module Inventory

Cisco 12000/10720 Router Manager Module Names

The naming convention used in Cisco 12000/10720 Router Manager for line cards, GRPs, CSCs, and SFCs is an abbreviated form of the type of module, followed by the slot number of the module. For example, an ATM line card in slot 6 is called A6, and a POS line card in slot 3 is called P3.

Table 5-1identifies each module type and its respective abbreviation in Cisco 12000/10720 Router Manager.

Table 5-1 Abbreviated Module Names

		Cisco 12000/10720 Router Manager
	Module	Abbreviation
	DS-3	D
	POS	P
	ATM	A
	Fast Ethernet	FE
		Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01			5-1