Chapter 4 Managing Chassis

Chassis Configuration

Note The Synchronize action is not applicable to Cisco 12000/10720 Router Manager

When Write Mem is invoked, the running configuration information is copied to the startup configuration on the device.

Chassis Configuration Window—Detailed Description

The Chassis Configuration window displays three tabs: Configuration, Additional Descriptions and Device Management.

Configuration Tab

The Configuration tab (Figure 4-3 on page 4-8) displays five areas: Validation Parameters, Action (not applicable to Cisco 12000/10720 Router Manager), Clock (not applicable), Power Supply (not applicable), Actions, and, Commission Status.

Validation Parameters

The Validation Parameters area contains attributes that describe the population characteristics of a chassis and are used to validate module deployment.

Number of Slots—Displays the number of slots in the chassis for plug-in modules.

Unavailable Slots—Displays a comma separated list of slots that modules cannot be deployed into.

Max Number of Sub-Modules per Slot—Defines the maximum number of sub-modules that can be deployed into each slot for the selected chassis.

Action

This area is not applicable to Cisco 12000/10720 Router Manager.

Clock

This area is not applicable to Cisco 12000/10720 Router Manager.

Power Supply

This area is not applicable to Cisco 12000/10720 Router Manager.

Actions

The Actions area is sub-divided into Management and Global Performance Logging areas.

Management

The Management area allows you to commission or decommission the selected chassis.

Commission—Click Commission to commission the selected chassis.

Decommission—Click Decommission to decommission the selected chassis.

Cisco 12000/10700 v3.1.1 Router Manager User Guide

 

OL-4455-01

4-13

 

 

 

Page 127
Image 127
Cisco Systems 12000/10700 V3.1.1 manual Chassis Configuration Window-Detailed Description