Cisco Systems 12000/10700 V3.1.1 Using RME for Chassis Management Tasks, SysLog Messages Area

Chapter 4 Managing Chassis

Using RME for Chassis Management Tasks

SysLog Messages Area

The Sys Log Messages area displays the following information:

Index—Arbitrary integer value to uniquely identify the listed messages. When it reaches the maximum value the agent flushes the area and wraps the value back to 1.

Facility—Name of the facility that generated the facility message.

Severity—Displays the severity of the message.

Message Name—Textual identification for the message type. A facility name in conjunction with a message name uniquely identifies a message type.

Message Text—Displays the text of the message. When the text of the message exceeds 255 bytes, the message is truncated to 254 bytes and a '*' character is appended, indicating that the message has been truncated.

Time Stamp—Displays the time the system has been running (when the message was generated).

Sys Log Message Details

The Sys Log Message Details area displays the following information:

Messages Not Recorded—Displays the number of syslog messages that were ignored.

Messages Not Processed—Displays the number of messages which could not be processed due to lack of system resources.

Messages Deleted From Table—Number of entries that have been removed to make room for new entries.

Notifications Sent—Displays the number of notifications sent.

Maximum Table Entries—Displays the upper limit on the number of entries that the area can contain.

Minimum SysLog Severity—Any message with a severity less than this one will be ignored by the agent. This field can be set to emergency, alert, critical, error, warning, notice, info, or debug.

Notifications Enabled—Displays whether notifications are enabled or not enabled.

Using RME for Chassis Management Tasks

The Cisco 12000/10720 Router Manager is integrated with Resource Manager Essentials (RME) as the GUI tool for Network Element Administration – part of the Operations and Administration functions of OAM&P in Cisco Service Provider EMSs. Refer to the Cisco 12000/10720 v3.1.1 Installation and Configuration Guide for details about administering RME (http://www.cisco.com/en/US/products/sw/netmgtsw/ps156/products_installation_and_configuration_g uide_books_list.html).

The RME application set provides a range of GUI-based applications for network element administration tasks including:

•Configuration Backup/Restore Using RME

•IOS Image Download Using RME

Cisco 12000/10700 v3.1.1 Router Manager User Guide

OL-4455-01 4-31