Chapter 8 Interface Configuration
IP Configuration
Viewing the IP Configuration Window
To view the IP Configuration window, proceed as follows:
Step 1
Figure 8-5 IP Configuration Window—Generic Parameters Tab
Step 2 Choose a Chassis, Module, and IP Interface from the lists displayed at the left of the window.
Configuring an IP Interface
To configure an IP Interface, follow these steps:
Step 1 Open the IP Interface Configuration window. See “Viewing the IP Configuration Window” section on page
Step 2 Choose a Chassis, Module, and IP Interface from the lists displayed at the left of the window.
Step 3 Configure the parameters displayed in the Generic Parameters tab, as required. See “IP Configuration
Cisco 12000/10700 v3.1.1 Router Manager User Guide
|
| |
|
