Chapter 11 Layer 3 QoS
WRED ToFab Configuration
Step 3 Modify the parameters in the ToFab Configuration tab, as required. See WRED ToFab Policy Configuration
Step 4 Click Save to save the changes.
Deleting an Existing ToFab policy
A ToFab policy can be deleted only if it is not currently associated to any line cards. If a policy is associated to a line card, it cannot be deleted unless it is disassociated from the line card.
To delete an existing ToFab policy, proceed as follows:
Step 1 Launch the Map Viewer, and choose the Layer3QoSView. Right click on the
Step 2 Choose the appropriate ToFab policy from the list displayed at the left side of the window.
Step 3 Choose Deployment>Delete Objects. The Deployment Wizard appears with a summary of what will be deleted.
Figure 11-15 Deployment Wizard—Summary
| Cisco 12000/10700 v3.1.1 Router Manager User Guide |
|
