Chapter 7 Interface Profiles
Creating a POS Interface Profile
Deleting an Existing POS Interface Profile
To delete an existing POS Interface profile, proceed as follows:
Step 1 Choose the Cisco 12000/10720 Manager>Configuration>POS>Configuration Profile option from a POS interface object. See Table
Step 2 Choose Edit > Delete Profile. Choose the profile you wish to delete from the list displayed. A Deletion Prompt window appears (see Figure
Figure 7-10 Deletion Prompt Window
Step 3 Click Yes to delete the selected profile or click No to close the window without deleting the profile.
When a profile is deleted it disappears from the list of existing profiles displayed in the POS Profile list at the left of the window.
POS Profile Window—Detailed Description
The POS Interface Configuration window displays a single POS Config tab.
POS Config Tab
The POS Config tab displays four areas: General, SONET Overhead, Alarm Reporting & Threshold and Alarm Reporting.
General
The General area allows you to configure the following information:
POS SPE
Clock
POS
Cisco 12000/10700 v3.1.1 Router Manager User Guide
|
| ||
|
|
