Cisco Systems 3825 manual ATM over Mpls Configurations, Redundancy Mode y-cable Standalone

Appendix B Configuration Examples

Overview

ATM over MPLS Configurations

The illustration below configures an ATM port mode pseudowire (PW) on interface ATM 0/0/0, ATM AAL5 SDU mode PW on ATM0/0/1 PVC 0/100, ATM N:1 VCC cell mode PW on ATM0/0/1 PVC 0/101, multiple PVCs N:1 VCC cell mode PW on ATM 0/0/1.1, and ATM 1:1 VCC cell mode PW on ATM0/0/1 PVC 0/102. It also configures Cell-Packing for port mode PWs, VCC cell-relay mode PWs and PVC mapping for ATM0/0/1.1 N:1 VCC cell relay PWs (see Figure B-6).

Figure B-6 ATM over MPLS Configuration

ATM over MPLS Configuration

88.88.88.88				99.99.99.99
	ATM0/0/0		GE 0/0/1	GE 0/0/1		ATM0/0/0
	ATM0/0/1					ATM0/0/1
		2.2.2.2/24		2.2.2.3/24
		MWR_A			MWR_B

Node-B

MWR_A

270639

RNC

!

version 12.4

service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption

!

hostname mwr_A

!

boot-start-marker boot-end-marker

!

card type e1 0 0 card type e1 0 1 card type e1 0 2 card type e1 1 0 logging buffered 4096 enable password lab

!

no aaa new-model memory-size iomem 25

!

redundancy

	mode y-cable
	standalone
!
	network-clock-participate	slot 1
	network-clock-participate	wic 0
	network-clock-participate	wic 1
	network-clock-participate	wic 2
	network-clock-participate	aim 1
	network-clock-select 1 E1	1/0/0
	mmi polling-interval 60
	no mmi auto-configure
	no mmi pvc
	mmi snmp-timeout 180
	ip cef
!
		Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
	OL-15667-03		B-41